5mm Orange LED 12V – Transparent Lens, Built-In Resistor

الوصف

🏷️ Product Title LED 5mm Orange 12V – Transparent, Built-In Resistor ✍️ Introduction This 5 mm orange 12 V LED 🔶 features a transparent round lens and an internal series resistor , so it connects directly to 12 V DC —no external resistor required. It’s a drop-in indicator for panels, enclosures, model dashboards, and DIY projects where fast, reliable signaling matters. 💡 Highlights Direct 12 V DC ⚡ — internal resistor handles current limiting. Bright orange output 🔸 — clear visibility with a warm hue. Standard 5 mm package ⚙️ — easy fit in bezels, PCBs, and breadboards. Polarity-marked leads ➕ long leg = Anode (+) , short leg = Cathode (–) . Long life ⏱️ — rated for extended operation within 12 V systems. 📦 What’s Included 5 mm Orange LED, 12 V (transparent lens, built-in resistor) × 1 ✨ Key Features Lens: Transparent, 5 mm round (THT) Nominal input: 12 V DC (no external resistor needed) Typical operating current: ≈10–15 mA Wavelength: 590–600 nm Viewing angle: ~20°–30° Package leads: Through-hole, tinned copper 📊 Specifications Parameter Value Package 5 mm round, through-hole (THT) Color / Peak λ Orange / 590–600 nm Supply Voltage 12 V DC nominal Typical Current ~10–15 mA Luminous Intensity ~1500–3000 mcd (batch-dependent) Viewing Angle ~20°–30° Operating Temp −25 °C to +85 °C Storage Dry, anti-static packaging 🧰 Compatibility & Tips Connect directly to 12 V DC observing polarity. For automotive use, many systems reach ~14 V while charging; if brightness is excessive, you may add a small series resistor (e.g., 120–220 Ω) for comfort, though not required for 12 V nominal. Use separate LEDs per indicator point for uniform brightness. 🎯 Use Cases Panel and front-panel switch indicators. Hobby/DIY projects and prototypes. Model dashboards and control enclosures. 12 V signage and status lights. 🛡️ Safety & Handling Observe polarity to avoid damage. Do not exceed the recommended voltage range for extended periods. Handle with ESD care; keep leads clean and dry before soldering. Avoid continuous operation in high-heat enclosures without ventilation. 🚚 Quality, Shipping & Batch Notes Each unit checked for 12 V operation and brightness uniformity . Minor cosmetic variations in epoxy clarity are normal. Packed in anti-static polybags for protection. ❓ FAQ Q1: Do I need an external resistor? A: No. The LED has a built-in resistor for 12 V DC. Q2: Can I run it on car power? A: Yes. It works on 12 V systems; at charging voltages (~14 V) brightness may increase—add a small resistor if you want to reduce glare. Q3: Is the lens diffused or clear? A: Transparent/clear lens for a forward-focused beam. ✍️ المقدمة هذا الدايود البرتقالي 5 مم بجهد 12 فولت 🔶 يأتي بعدسة شفافة ومع مقاومة داخلية تحدّ من التيار، لذا يمكن توصيله مباشرة بجهد 12 فولت DC دون مكونات إضافية. خيار عملي وسريع لمؤشرات اللوحات والصناديق والمشاريع التعليمية. 💡 أبرز النقاط توصيل مباشر 12 فولت ⚡ بفضل المقاومة المدمجة. إضاءة برتقالية واضحة 🔸 برؤية جيدة. حجم قياسي 5 مم ⚙️ يناسب الحوامل والـPCB. تحديد قطبية سهل ➕ الرجل الطويلة موجبة. عمر تشغيلي طويل ضمن حدود التشغيل. 📊 المواصفات البند القيمة العبوة 5 مم THT اللون / λ برتقالي / 590–600 نانومتر الجهد الاسمي 12 فولت DC التيار النموذجي ~10–15 مللي أمبير الشدة الضوئية ~1500–3000 mcd زاوية الرؤية ~20°–30°

من صفحة المورد.