CP2102 USB to TTL Converter

Description

CP2102 USB to TTL Converter This CP2102 UART module is a USB to TTL UART Converter module which is based on CP2102 Bridge by SiLabs. This CP2102 UART module is compliant with USB2.0 full-speed devices with an integrated transceiver. The USB function controller manages all data transfers between the USB and the UART as well as command requests generated by the USB host controller and commands for controlling the function of the UART. The USB Suspend and Resume signals are supported for power management of both the CP2102 device as well as external circuitry.. CP2102 USB to TTL Pin Out: Pin Name Description VCCIO Jumper Configurable VCC (3.3v or 5v) Out Pin GND Ground PWR LED Power Indicator LED TxD Asynchronous data output (UART Transmit) Tx LED UART Transmit (data out) Indicator LED RxD Asynchronous data input (UART Receive) Rx LED UART Receive (data in) Indicator LED RTS Ready to Send control output (active low) CTS Clear To Send control input (active low) GND Ground Device Reset. The open-drain output of internal POR or VDD monitor. An external source can initiate a system reset by driving this pin low for at least 15 μs. This pin is driven low when the CP2102/9 enters the USB suspend state. SUSPEND This pin is driven high when the CP2102 enters the USB suspend state RI Ring Indicator control input (active low) DCD Data Carrier Detect control input (active low) DTR Data Terminal Ready control output (active low) DSR Data Set Ready control input (active low) Package Includes: 1x CP2102 USB to TTL Converter Documents: Tutorial Datasheet Related Products: IC Programmers | Testers | Data Converters

From the supplier's page.