Power Relay SPDT HJR-3FF-S-Z (1 Form C) 24VDC Coil Through Hole 5 Pin
EGP 13
See other suppliers →Description
A relay is an electrically operated switch. It consists of a set of input terminals for a single or multiple control signals, and a set of operating contact terminals. The switch may have any number of contacts in multiple contact forms, such as make contacts, break contacts, or combinations thereof. Relay Pin Configuration Pin Number Pin Name Description 1 Coil End 1 Used to trigger(On/Off) the Relay, Normally one end is connected to 24V and the other end to ground 2 Coil End 2 Used to trigger(On/Off) the Relay, Normally one end is connected to 24V and the other end to ground 3 Common (COM) Common is connected to one End of the Load that is to be controlled 4 Normally Close (NC) The other end of the load is either connected to NO or NC. If connected to NC the load remains connected before trigger 5 Normally Open (NO) The other end of the load is either connected to NO or NC. If connected to NO the load remains disconnected before trigger Specifications of 5-Pin 24V Relay Mounting Type: THT Contact Form: SPDT (1 Form C) Coil Type :: Non Latching Contact Current: 7A Coil Voltage: 24VDC Coil Current: 15mA Contact Voltage: 240VAC Coil Resistance: 1.6 kOhms Working Temperature: -40 ° C ~ + 85 ° C Number of Pin: 5PIN Applications of Relay Commonly used in switching circuits. For Home Automation projects to switch AC loads To Control (On/Off) Heavy loads at a pre-determined time/condition Used in safety circuits to disconnect the load from supply in event of failure Used in Automobiles electronics for controlling indicators glass motors etc. HJR-3FF Datasheet
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.