ESUN WOOD 3D Filament 1.75mm 0.5Kg Roll for 3D Printer-NATURAL
EGP 750
See other suppliers →Description
Wood This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3. Description This is a PLA based 3D printing material with cool appearance like wood. It was the characteristics of easy to print and smooth surface as PLA.It tilize active foaming technology to achieve like-wood appearance with low-density PLA of 0.7g/cm3. Sellingpoint Cool appearance like wood. Low-density PLA of 0.7g/cm3. Easy to paint. Easy to print as PLA. Filament Properties Table 3D PRINTING FILAMENT Wood Density(g/cm 3 ) 0.7 Heat Distortion Temp(℃,0.45MPa) 45 Melt Flow Index(g/10min) 17(190℃/2.16kg) Tensile Strength(MPa) / Elongation at Break(%) / Flexural Strength(MPa) / Flexural Modulus(MPa) / IZOD Impact Strength(kJ/㎡) / Durability 4/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 210 – 230℃ Recommended temperature：210℃ Bed temperature(℃) 45 – 60°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI Print recommend Pay attention to turn off the speed reduction function on the software
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.