makhzan.
Browse
TFT LCD Display Module SPI Interface 1.8 Inch 128*160

TFT LCD Display Module SPI Interface 1.8 Inch 128*160

In stockDisplaysVerified 2 weeks ago

EGP 245

Makers Electronics

See other suppliers

Description

TFT LCD Display Module SPI Interface 1.8 Inch 128*160 1.8 Inch TFT LCD Display Module SPI Interface 128 x 160 with 4 IO uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8″ display has 128×160 colour pixels. Unlike the low-cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735) can display a full 18-bit colour (262,144 shades!). The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-colour bitmaps from a FAT16/FAT32 formatted microSD card. Features : 1.8-inch serial SPI colour display module Support analogue SPI and hardware SPI The LCD has a wide viewing angle, the contrast is also very suitable. Easy to expand the experiment with an SD card slot Pin Configuration: Number Pin Label Description 1 VCC 5V/3.3V power input 2 GND Ground 3 CS LCD chip select signal, low level enable 4 RESET LCD reset signal, low level reset 5 A0 LCD register / data selection signal,high level: register, low level: data 6 SDA SPI bus write data signal 7 SCK SPI bus clock signal 8 LED Backlight control, high level lighting,if not controlled, connect 3.3V always bright Specifications: Screen Size 1.8(inch) Type TFT Driver IC ST7735 Resolution 128*160 (Pixel) Module Interface 4-wire SPI interface Active Area (AA area) 28.03×35.04(mm) Module PCB Size 34.5×58.0(mm) Operating Temperature -20℃~60℃ Storage Temperature -30℃~70℃ VCC power voltage 3.3V~5V Logic IO port voltage 3.3V(TTL) Applications: Embedded system displays. Arduino and Raspberry Pi projects. Industrial control panels. IoT devices. Portable instruments. DIY electronics projects. User interface displays. Package Include: 1x TFT LCD Display Module SPI Interface 1.8 Inch 128*160 Documents: 1.8 inch SPI Module User Manual 1.8 inch TFT Specifications 1.8 inch SPI Module Size Picture 1.8 inch SPI Module Schematic 1.8 inch QDTFT1801 TFT LCD Schematic and PCB Package Library Driver IC ST7735S Data sheet 1.8 inch SPI Module Package

From the supplier's page.

Visit Makers Electronics

makhzan doesn't sell — every offer opens the supplier's own site.

TFT LCD Display Module SPI Interface 1.8 Inch 128*160 · makhzan