Power Resistor 30W 10Ω

Description

Power Resistor 30W 10Ω The 30 W, 10 Ω cement-type power resistor features a high-alumina ceramic core enclosed within a cement-coated ceramic body that provides mechanical protection and thermal stability. The resistive element may be realized as a metal-oxide film or a resistance wire, embedded and sealed with silicone-based cement to resist moisture and improve heat transfer. Termination is provided by welded tinned iron end caps with solderable leads, offering a secure electrical connection for through-hole mounting or wired assemblies. Rated for continuous 30 W dissipation, this resistor’s nominal electrical behavior follows the defined power and resistance relationship; its rated voltage is √(P×R) approximately 17.32 V for the 10 Ω value. The part is designed to operate continuously at the rated ambient with a manufacturer-specified derating curve as temperature rises, and it tolerates short-duration overloads and pulse stresses within the limits set by the specification, maintaining stable resistance under both steady-state and transient thermal loading. Constructed to meet common industrial reliability tests, the component passes solderability and solder-heat checks, dielectric and insulation testing, temperature cycling, humidity load-life and extended load-life trials. The cement sealing and ceramic casing minimize moisture ingress and mechanical stress, reducing long-term drift. These qualities make the resistor suitable where predictable dissipation, long-term stability, and flame-resistant housing are required. Features: Cement-coated ceramic housing with high-alumina core. Metal-oxide film or resistance-wire element options. Silicone/silicon-cement sealing (flame-resistant). Welded tinned iron end caps with solderable leads. Continuous 30 W rating with derating for elevated ambient temperature. Designed to meet standard reliability tests (solder heat, humidity, load life). Parameter Value Product type: Cement (ceramic) power resistor Rated power: 30 W Nominal resistance: 10 Ω Rated voltage (E = √(P×R)): ≈ 17.32 V Maximum working voltage: 1,000 V Maximum overload voltage: 1,500 V Dielectric withstanding voltage: 1,000 V Temperature coefficient: Metal-oxide: ±350 ppm/°C; Resistance wire: ±260 ppm/°C Resistance tolerance options: K (±10%), J (±5%), G (±2%) Insulation resistance: ≥ 10³ MΩ Solderability / solder heat resistance: Solderability ≥95% coverage; solder heat test 350±10 °C for 3±1 s Load life / humidity life tests: Load life: 70±3 °C, 1000 h; Humidity load life: 40±2 °C, 90–95% RH, 1000 h Typical external dims (CR-L style): L 75±2.0 mm × W 19±2.0 mm × H 17±2.0 mm; lead dia Φ 0.68 mm Applications: Power control circuits. Load testing / dummy loads. Motor drive braking and discharge networks. Industrial automation equipment. Power supplies and inverter systems. Package Contents: 1x Power Resistor 30W 10Ω Datasheet

From the supplier's page.