ESUN PETG 3D Filament 1.75mm 1Kg Roll for 3D Printer
See other suppliers →Description
PETS PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber. Diameter Size: 1.75mm Net Weight：1kg/spool Introduction: Description PETG is a high-cost performance material with water resistance, chemical resistance, and high toughness. It’s tougher than ABS; The printed product has a translucent and smooth surface. It’s easy to print as PLA without a temperature chamber. * Application Advertisement Waterproof application Snap-in parts Flowerpot Flowerpot Filament Properties Table 3D PRINTING FILAMENT PETG Density(g/cm 3 ) 1.27 Heat Distortion Temp(℃,0.45MPa) 64 Melt Flow Index(g/10min) 20（250℃/2.16kg) Tensile Strength(MPa) 52.2 Elongation at Break(%) 83 Flexural Strength(MPa) 58.1 Flexural Modulus(MPa) 1073 IZOD Impact Strength(kJ/㎡) 4.7 Durability 8/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 230 – 250℃ Recommended temperature：240℃ Bed temperature(℃) 75 – 90°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Required Recommended Build Surfaces Masking paper, PVP solid glue
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.