Ai-Thinker Ra-01SC LoRaWAN Module

Description

Ai-Thinker Ra-01SC LoRaWAN Module The Ai-Thinker Ra-01SC LoRaWAN Module is an advanced communication module engineered for ultra-long-distance spread spectrum communication, making it a cornerstone for Internet of Things (IoT) applications. Built around the Semtech LLCC68 RF chip, this module leverages LoRa technology to deliver exceptional range, reliability, and power efficiency. With a sensitivity of -129 dBm and a maximum output power of +22 dBm, the Ra-01SC ensures robust connectivity in challenging environments, such as urban areas or remote locations. Its low power consumption, with a minimum received current of 4.2 mA and a stand-by current of 0.6 mA, makes it ideal for battery-powered devices, extending operational life without frequent recharging or replacement. The module supports multiple modulation modes, including FSK, GFSK, MSK, GMSK, LoRa, and OOK, offering flexibility to meet diverse application needs. Features: LoRaTM modem. Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK mode. Frequency supports 410MHz~525MHz. Operating voltage is 3.3V, Max output transmitting power:+22dBm,Max current:140m. Low power consumption in a received state, the min received current is 4.2mA,stand-by current is 0.6mA. High sensitivity: As low as -129dBm. Support spreading factor:SF5/SF6/SF7/SF8/SF9/SF10/SF11. Small volume double row stamp hole patch for SMD package. Adopts SPI interface, half-duplex communication, with CRC, up to 256-byte packet engine. Compatible with various antenna interface: stamp hole/round hole and IPEX, supports more scheme selection. Specifications: Category Specification Model Ra-01SC Package SMD16 Size 17mm × 16mm × 3.2mm (±0.2 mm) Antenna IPEX connector Frequency Range 410 MHz ~ 525 MHz Operating Temperature -40°C ~ 85°C Storage Environment -40°C ~ 125°C, <90% RH Power Supply 2.7V ~ 3.6V (Typical 3.3V), Recommended current >200mA Interface SPI Programmable Bit Rate Max 300 Kbps Crystal Frequency 32 MHz Transmission Distance Open Environment: • Spring Antenna: 2.8 km • Suction Cup Antenna: 4.6 km Pin Configuration: No. Name Function / Instruction 1 ANT Ground (Antenna ground connection) 2 GND Ground , Connect to the power reference ground 3 3.3V Power Supply (Typical 3.3V, recommended current >200mA) 4 RESET Reset (Active-low reset input) 5 TXEN RF Control Port (Transmit Enable) 6 DIO1 Digital IO1 (Software-configurable interrupt/event pin) 7 DIO2 Digital IO2 (Software-configurable interrupt/event pin) 8 DIO3 Digital IO3 (Software-configurable interrupt/event pin) 9 GND Ground 10 BUSY Status Indicator (Must be connected to the master MCU’s IO port) 11 RXEN RF Control Port (Receive Enable) 12 SCK SPI Clock Input (Serial Peripheral Interface clock) 13 MISO SPI Data Output (Master In Slave Out) 14 MOSI SPI Data Input (Master Out Slave In) 15 NSS SPI Chip Select Input (Active-low slave select) 16 GND Ground , Connect to the power reference ground Applications: Smart meters for remote utility monitoring. Supply chain and logistics for asset tracking. Home and building automation for device control. Agricultural monitoring for irrigation optimization. Environmental monitoring for data collection. Industrial automation for process monitoring. Package Include: 1x Ai-Thinker Ra-01SC LoRaWAN Module. Data Sheet: Ra-01SC

From the supplier's page.