KCD1-101 ON/OFF Rocker Switch , 6A 250VAC

Description

KCD1-101 ON/OFF Rocker Switch The KCD1-101 Rocker Switch provides manual ON/OFF control for electrical and electronic equipment. Its SPST contact configuration uses two terminals for simple series connection. The compact housing fits equipment panels and project enclosures. In addition, the snap-in design helps simplify installation in a compatible rectangular opening. Key Features Provides simple ON/OFF switching Uses an SPST contact configuration Includes two metal terminals Carries a 6A at 250VAC rating Features clear I/O position markings Supports snap-in panel installation Uses a compact insulated housing Suits appliances and electrical projects Technical Specifications Model: KCD1-101 Switch Type: Rocker switch Switching Function: ON/OFF Contact Configuration: SPST Number of Positions: Two Number of Terminals: Two Rated Current: 6A Rated Voltage: 250VAC Mounting Type: Snap-in panel mount Terminal Type: Metal blade terminals Actuation: Manual rocker Terminal Operation The switch contains two terminals: Input Terminal: Connects to the incoming supply line Output Terminal: Connects to the controlled load The switch connects both terminals in the ON position. However, it separates them in the OFF position. Applications Use the KCD1-101 switch in: Power supply enclosures Extension sockets Lighting circuits Household appliances Chargers Control panels Workshop equipment DIY electrical projects Electronic equipment Installation Guidelines Disconnect the electrical supply. Confirm the switch rating and load requirements. Cut a compatible rectangular panel opening. Push the switch into the panel until it locks. Connect the switch in series with the supply line. Insulate all exposed electrical connections. Test the ON and OFF positions safely. Package Contents 1 × KCD1-101 two-pin ON/OFF rocker switch Important Notes Disconnect mains electricity before installation. A qualified technician should handle mains-voltage wiring. Do not exceed the 6A at 250VAC rating. Install the switch inside a suitable insulated enclosure. Switch the live wire rather than the neutral wire. Inductive loads may require current derating and surge suppression. Check the markings on the supplied batch before installation. Color and dimensions may vary slightly between batches.

From the supplier's page.