MPU6500 Accelerometer and Gyroscope Module
EGP 365
See other suppliers →Description
MPU6500 Accelerometer and Gyroscope Module The MPU-6500 is a 6-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) all in a small 3x3x0.9mm package. It also features a 4096-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. With its dedicated I2C sensor bus, the MPU-6500 directly accepts inputs from external I2C devices. MPU-6500, with its 6-axis integration, on-chip DMP, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-6500 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port. MPU6500 Pinout: Pin Number Pin Name Description 1 V CC Power Supply 2 GND Ground Reference 3 SCL I2C Serial Clock 4 SDA I2C Serial Data 5 EDA Auxiliary Serial Data 6 ECL Auxiliary Serial Clock 7 AD0 I2C/SPI Address Select 8 INT Interrupt 9 NCS SPI Chip Select 10 FSYNC Frame Synchronization Specifications: Operating Voltage: 3-5v Communication Protocol: I2C / SPI Gyroscopes Range: ± 250 500 1000 2000°/s Acceleration Range: ± 2 ± 4 ± 8 ± 16g Dimension: 15 x 25mm Package Includes: 1x MPU6500 Module Documents: Instructions Datasheet Related Products: SENSORS | MODULES
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.