744052 Dual 4-Channel Analog Multiplexer/Demultiplexer IC DIP-16

Description

744052 Dual 4-Channel Analog Multiplexer/Demultiplexer IC DIP-16 The 744052 Dual 4-Channel Analog Multiplexer/Demultiplexer IC DIP-16 is a high-performance CMOS device designed for both analog and digital signal routing applications. It functions as two independent single-pole quadruple-throw (SP4T) switches, each with four independent inputs/outputs and a common input/output. The device includes digital select inputs (S0 and S1) and an enable input (E, active LOW) shared by both switches. When E is HIGH, the switches are turned off, ensuring high impedance. Built with CMOS technology, it offers low power dissipation, high noise immunity, and a wide analog input voltage range from -5V to +5V. The IC supports logic level translation, allowing 5V logic to interface with ±5V analog signals, and features built-in ‘break before make’ to prevent short circuits during switching. Features: Wide analog input voltage range from -5V to +5V. CMOS low power dissipation. High noise immunity. Latch-up performance exceeds 100mA per JESD 78 Class II Level B. Low ON resistance: 80Ω (typical) at VCC-VEE=4.5V; 70Ω (typical) at 6.0V; 60Ω (typical) at 9.0V. Logic level translation to enable 5V logic to communicate with ±5V analog signals. Specifications: Parameter Value Supply Voltage (VCC-GND) 2.0V to 10.0V Supply Voltage (VCC-VEE) 2.0V to 10.0V Input Voltage Range (VI) GND to VCC Switch Voltage Range (VSW) VEE to VCC Operating Temperature Range -40°C to +125°C ON Resistance (RON) typ 80Ω at VCC-VEE=4.5V ON Resistance (Peak) typ 70Ω at VCC=4.5V, VEE=-4.5V ON Resistance (Rail) typ 60Ω to 65Ω at VCC=4.5V, VEE=-4.5V ON Resistance Mismatch (ΔRON) typ 6Ω at VCC=4.5V, VEE=-4.5V HIGH-Level Input Voltage (VIH) min 2.0V at VCC=4.5V LOW-Level Input Voltage (VIL) max 0.8V at VCC=4.5V Input Leakage Current (II) max ±1.0μA OFF-State Leakage Current (IS(OFF)) max ±2.0μA ON-State Leakage Current (IS(ON)) max ±2.0μA Supply Current (ICC) max 80μA to 160μA Input Capacitance (CI) typ 3.5pF Switch Capacitance (Csw) typ 12pF Propagation Delay (tpd) typ 4ns to 15ns Turn-On Time (ton) typ 26ns to 28ns Turn-Off Time (toff) typ 21ns to 22ns Power Dissipation Capacitance (CPD) typ 57pF Package DIP-16 Pin Configuration: Applications: Analog signal multiplexing and demultiplexing in data acquisition systems. Digital channel selection in mixed-signal control circuits. Audio and instrumentation signal routing. Embedded systems requiring analog/digital signal switching. Sensor array multiplexing in test and measurement platforms. Package Include: 1x 744052 Dual 4-Channel Analog Multiplexer/Demultiplexer IC DIP-16. Datasheet: 744052

From the supplier's page.