L298 Motor Driver Module

Description

L298 Motor Driver Module The L298 Motor Driver Module is a versatile and powerful solution for controlling the direction and speed of two DC motors or one stepper motor. Utilizing the popular L298N driver IC, this module allows for precise motor control in various applications, making it ideal for robotics, automation, and DIY projects. The module features screw connectors for easy and secure connections to power sources and motors, allowing you to fasten wires with a screwdriver for a reliable setup. Control signals are conveniently output through gold pin connectors, enabling seamless integration with popular development boards like Arduino. This flexibility allows for straightforward wiring and programming, making it accessible for both beginners and experienced users. PINOUT: PIN DESCRIPTION +12V The voltage of the motor’s power supply. +5V The power of the theological part with the regulator – is active after you remove the jumper 5V. GND The weight of the system OUT1, OUT2 The channel outputs of engine A. OUT3, OUT4 The channel outputs of engine B. ENA PWM signal to control the rotational speed of the engine A. By default, it is connected to 5 V by jumper -which means that the engine works with the maximum speed. IN1, IN2 Control of channel A direction ENB PWM signal to control the rotation speed of motor B. By default, connected to the 5 V by jumper – it means that the engine works with maximum speed. IN3, IN4 Direction control of channel B The truth table of driver L298: IN1 / IN3 IN2 / IN4 THE OUTPUTS OF THE ENGINES high low The motor rotates with the maximum given speed using PWM (different from 0) in a clockwise direction. low high The motor rotates at the maximum given speed using PWM (not equal to 0) in a counterclockwise direction. low low When indicated high state at the PWM input – fast braking of the motors (fast stop). high high When indicated high state at the PWM input – fast braking of the motors (fast stop). high high When indicated low state at the PWM input – free braking (soft stop). Specifications: Supply voltage: 12 V Supply voltage of the logic part: 5 V Built-in voltage regulator 5 V to power the logic part with the possibility of disconnection via jumper Maximum output current: 2 A per channel L298 module to control two DC motors or one stepper motor The outputs for the motors and the power inputs were displayed on the screw connectors ARK The input pins of the logic part are available on the gold pin connectors – 2.54 mm pitch The board consists of all necessary for the proper operation of the controller, passive components The system has a mounted radiator Tile sizes: 43.5 x 43.5 x 26 mm Applications: Robotics and automation systems. Used to drive high current LED’s. Educational & DIY Projects. Package Includes: 1x L298 Motor Driver Module. Useful Links: L298 Datasheet Example Arduino project

From the supplier's page.