ESUN eTPU-95A 3D Filament 1.75mm 1Kg Roll for 3D Printer
See other suppliers →Description
eTPU-95A It has good flexibility with a hardness of 95A, easy to print, and can quickly print large, complex and accurate prototypes of elastomer parts; excellent elasticity, printed products are not easy to deform; good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; high hardness and good resilience, can be used for insoles and other applications. Description It has good flexibility with a hardness of 95A, easy to print, and can quickly print large, complex and accurate prototypes of elastomer parts; excellent elasticity, printed products are not easy to deform; good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; high hardness and good resilience, can be used for insoles and other applications. Sellingpoint Flexible and soft Sturdy and durable High flexibility High toughness High impact resistance Filament Properties Table 3D PRINTING FILAMENT eTPU-95A Density(g/cm 3 ) 1.21 Heat Distortion Temp(℃,0.45MPa) / Melt Flow Index(g/10min) 1.2(190℃/2.16kg) Tensile Strength(MPa) 35 Elongation at Break(%) ≥800 Flexural Strength(MPa) / Flexural Modulus(MPa) / IZOD Impact Strength(kJ/㎡) / Durability 9/10 Printability 6/10 Recommended printing parameters Extruder Temperature(℃) 220 – 250℃ Recommended temperature：240℃ Bed temperature(℃) 45 – 60°C Fan Speed 100% Printing Speed 20 – 50mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI Feature Flexible √ Elastic √ Impact Resistant √ Soft √ Composite —— UV Resistant —— Water Resistant —— Dissolvable —— Heat Resistant —— Chemically Resistant —— Fatigue Resistant √ Need drying —— Heated Bed Required —— Print recommend Drying at 55℃/>4h, short-range extruder, slow printing
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.