CD4052BE Dual 4-Channel Analog Multiplexer/Demultiplexer DIP-16

Description

CD4052BE Dual 4-Channel Analog Multiplexer/Demultiplexer DIP-16 The CD4052BE Dual 4-Channel Analog Multiplexer/Demultiplexer DIP-16 is a CMOS analog switching IC designed to control analog or digital signal routing using digital address inputs. It contains two independent 4-channel sections, commonly identified as X and Y channels, allowing paired signal paths to be selected at the same time. This makes it suitable for differential or dual-signal switching applications where two related signals need to be routed together. The device is supplied in a 16-pin PDIP package, making it practical for breadboards, prototyping, repair work, and through-hole PCB designs. According to the datasheet, the CD4052B uses two binary control inputs, A and B, together with an inhibit input. These control signals select one of four channel pairs and connect the selected analog inputs to the common outputs. When the inhibit input is set to logic high, all channels are turned off, allowing the circuit to disconnect all signal paths when needed. The IC also includes logic-level conversion, enabling digital control signals to switch analog signals over a wider signal range. The CD4052BE is useful in circuits that require compact, low-power signal selection, such as data acquisition, audio signal routing, sensor channel selection, and analog-to-digital or digital-to-analog conversion systems. It offers low quiescent power dissipation, low ON resistance, and very low OFF leakage, helping maintain signal integrity while reducing power consumption. Its break-before-make switching operation helps prevent channel overlap during transitions, making it reliable for precision switching and multiplexing applications. Features: Dual 4-channel analog multiplexer/demultiplexer design. CMOS analog switch with logic-level conversion. Supports digital signal levels from 3V to 20V. Supports analog signal levels up to 20VP-P. Low ON resistance of 125Ω typical at VDD − VEE = 18V. Very low OFF channel leakage current of ±100pA typical. Two binary address inputs for channel selection. Inhibit input turns all channels off when activated. On-chip binary address decoding. Break-before-make switching prevents channel overlap. Very low quiescent power dissipation. 5V, 10V, and 15V parametric ratings. Suitable for analog and digital multiplexing or demultiplexing. DIP-16 through-hole package for easy prototyping and PCB mounting. Input protection through standard CMOS protection network. Specifications: Specification Value Product Type: Dual 4-Channel Analog Multiplexer/Demultiplexer Part Number: CD4052BE Device Family: CD4052B Logic Type: CMOS Function: Analog Multiplexer/Demultiplexer Number of Channels: Dual 4-Channel Channel Configuration: 4 pairs of channels, X and Y sections Control Inputs: A, B Inhibit Input: Available Package Type: PDIP Number of Pins: 16 Pins Digital Signal Level Range: 3V to 20V Analog Signal Level Range: Up to 20VP-P Typical ON Resistance: 125Ω at VDD − VEE = 18V Typical OFF Channel Leakage: ±100pA at VDD − VEE = 18V Typical Quiescent Power Dissipation: 0.2µW at VDD − VSS = VDD − VEE = 10V Parametric Ratings: 5V, 10V, and 15V Supply Voltage Range Referenced to VSS: -0.5V to 20V maximum rating DC Input Voltage Range: -0.5V to VDD + 0.5V DC Input Current: ±10mA maximum Operating Temperature Range: -55°C to 125°C Storage Temperature Range: -65°C to 150°C PDIP Thermal Impedance: 67°C/W Switching Type: Break-before-make Main Applications: Analog/digital multiplexing, demultiplexing, A/D and D/A conversion, signal gating Pinout: Pin Configuration: Pin Number Pin Name Description 16 Vdd Positive power input, maximum 20V 7 Vee Negative power rail, normally connected to ground. 8 Vss (Ground) Connected to the ground of the circuit 6 INH Enable pin – Must be pulled to ground for normal operation 9,10 A, B Channel Select pins 1,12 Y0,X0 Channel 0 Input / Output 5,14 Y1,X1 Channel 1 Input / Output 2,15 Y2,X2 Channel 2 Input / Output 4,11 Y3,X3 Channel 3 Input / Output 3,13 Y, X Common Output / Input Applications: Analog Signal Multiplexing. Analog Signal Demultiplexing. Digital Signal Multiplexing. Digital Signal Demultiplexing. A/D Conversion Systems. D/A Conversion Systems. Signal Gating Circuits. Sensor Signal Selection. Audio Signal Routing. Data Acquisition Systems. Differential Signal Switching. Communication Signal Routing. Package Contents: 1x CD4052BE Dual 4-Channel Analog Multiplexer/Demultiplexer DIP-16 Datasheet

From the supplier's page.