Lithium Battery Charger Protection Module (BMS) 16S 30A 60V

Description

Lithium Battery Charger Protection Module ( BMS ) 16S 30A 60V The Lithium Battery Charger Protection Module (BMS) 16S 30A 60V is a compact PCB-mount Battery Management System designed for lithium-ion or lithium-polymer battery packs comprising up to 16 cells in series. It provides essential safety and battery-management functions — including over-charge, over-discharge, over-current, short-circuit, and temperature protection — while also performing passive cell balancing to ensure uniform cell voltages across the pack. Its 30 A continuous discharge rating makes it suitable for medium-power electric bikes, scooters, solar storage systems, portable power packs, and DIY lithium battery builds. Features Supports up to 16 cells in series (16S) — suitable for nominal 60 V battery packs (full-charge up to ~67.2 V for Li-ion cells). Continuous discharge rating typically 30 A. Passive cell-balancing circuit to equalize cell voltages — extends pack life and improves safety. Full protection suite: over-charge cutoff, over-discharge cutoff, over-current protection, short-circuit protection. Balance-lead harness included for all 16 cells. Compact PCB layout, suitable for DIY battery pack builds, scooter/ebike batteries, solar backup packs, and high-voltage battery systems. Compatible with common lithium-ion chemistries (18650/21700 prismatic or cylindrical cells), lithium-polymer (Li-Po), and LiFePO₄. PINOUT Specifications Parameter Value / Range Series Configuration 16S (16 cells in series) Nominal Pack Voltage ~60 V (3.7 V nominal per cell × 16) Full Charge Voltage (Li-ion) ~67.2 V (4.2 V × 16) — ensure charger matches spec Continuous Discharge Current 30 A Protection Functions Over-charge, Over-discharge, Over-current, Short-circuit, Cell balancing Balance Method Passive (resistor balancing), via multi-wire balance harness Cell Types Supported Lithium-ion, Li-Po, LiFePO₄ (depending on charge/discharge voltage settings) Typical Use Cases Electric bikes & scooters, power-walls, DIY battery packs, portable energy systems, solar storage, high-voltage tool packs Applications Battery packs for 60V electric bicycles, scooters, small EVs, and mobility devices. Portable battery storage or backup power banks for off-grid and solar applications. DIY battery systems using 16-cell lithium banks (e.g. tool packs, marine batteries, portable energy systems). Replacement or upgrade BMS board for existing 16S battery packs requiring balancing and safety features. Medium-power discharge applications (motors, inverters, lighting systems, etc.). Package Contents 1x Lithium Battery Charger Protection Module (BMS) 16S 30A 60V. 1x 17-pin connector with 30cm lead wires.

From the supplier's page.