makhzan.
Browse
MN4164P-12A DRAM 64K x1 Bit 120ns IC DIP-16
MN4164P-12A

MN4164P-12A DRAM 64K x1 Bit 120ns IC DIP-16

In stockIntegrated CircuitsVerified 2 hours ago

EGP 30

Makers Electronics

See other suppliers

Description

MN4164P-12A DRAM 64K x1 Bit 120ns IC DIP-16 The MN4164P-12A is a single-chip dynamic RAM organized as 64K × 1 bit with a 120 ns access time, provided in a 16-pin DIP package. It implements the standard multiplexed row/column address scheme (RAS/CAS) used by early 64K DRAMs and is intended for use as general purpose byte-serial memory in small microcomputer and embedded systems designs. The device’s single-bit data path and simple control signals make it suitable where multiple devices are combined to form wider buses. Reads and writes are controlled with the RAS/CAS timing sequence; addresses are applied as a multiplexed pair (row then column). The device requires periodic refresh of stored data (via standard RAS-only or RAS/CAS refresh cycles) and provides an active I/O pin that floats when deselected. Typical timing and control requirements align with other 4164-class DRAMs (120 ns access characteristic). In practice the MN4164P-12A is used in small memory expansion banks or as part of multi-chip assemblies to create 8/16-bit wide modules. Its DIP-16 package makes it easy to prototype on breadboards or through-hole PCBs. For exact electrical limits, timing diagrams, and recommended refresh/operating conditions, refer to the scanned datasheet. Features: 64K × 1-bit organization (65536 words of 1 bit each). 120 ns access time. Multiplexed row/column address inputs (RAS/CAS control). Single-bit data I/O (I/O pin that is active during read/write). Standard 16-pin DIP through-hole package. TTL-compatible control and address inputs. Supports standard RAS-only and RAS/CAS refresh cycles. Specifications: Parameter Value Organization: 64K × 1 bit Access time: 120 ns Package: 16-pin DIP (through-hole) Addressing: Multiplexed row/column (RAS/CAS) Data I/O width: 1 bit Refresh: RAS-only or RAS/CAS refresh (standard DRAM refresh) Recommended use: Memory expansion in microcomputer/embedded systems Pin Configuration: Applications: Memory expansion for microprocessors. Small embedded system main/working memory. Multi-chip memory banks for 8/16-bit systems. Educational/prototyping through-hole DRAM modules. Package Contents: 1x MN4164P-12A DRAM 64K x1 Bit 120ns IC DIP-16 Datasheet

From the supplier's page.

Visit Makers Electronics

makhzan doesn't sell — every offer opens the supplier's own site.