makhzan.
Browse
IRFZ44N N-Channel Power MOSFET Transistor 49A-55V-17.5mΩ TO-220
IRFZ44N

IRFZ44N N-Channel Power MOSFET Transistor 49A-55V-17.5mΩ TO-220

In stockTransistors & MOSFETsVerified 2 weeks ago

EGP 16.50

Makers Electronics

See other suppliers

Description

IRFZ44N N-Channel Power MOSFET Transistor 49A-55V-17.5mΩ TO-220 The IRFZ44N is a N-channel MOSFET with a high drain current of 49A and low Rds value of 17.5 mΩ. It also has a low threshold voltage of 4V at which the MOSFET will start conducting. Hence it is commonly used with microcontrollers to drive with 5V. However a driver circuit is needed if the MOSFET has to be switched in completely. Features Small signal N-Channel MOSFET Continuous Drain Current (ID) is 49A at 25°C Pulsed Drain Current (ID-peak) is 160A Minimum Gate threshold voltage (VGS-th) is 2V Maximum Gate threshold voltage (VGS-th) is 4V Gate-Source Voltage is (VGS) is ±20V (max) Maximum Drain-Source Voltage (VDS) is 55V Rise time and fall time is about 60ns and 45ns respectively. It is commonly used with Arduino, due to its low threshold current. Available in To-220 package Specifications: Parameter Value Part Number IRFZ44N Transistor Type N-Channel Power MOSFET Technology Enhancement Mode MOSFET Package TO-220AB Mounting Type Through-Hole Drain-to-Source Voltage (VDS) 55V Continuous Drain Current (ID) 49A Continuous Drain Current @100°C 35A Pulsed Drain Current (IDM) 160A Drain-to-Source On-Resistance (RDS(on)) 17.5mΩ(Max) Gate-to-Source Voltage (VGS) ±20V Gate Threshold Voltage (VGS(th)) 2V to 4V Power Dissipation (PD) 94W Total Gate Charge (Qg) 63nC(Typ) Operating Junction Temperature -55°C to +175°C Package Style TO-220AB Note: Complete Technical Details can be found in the IRFZ44N datasheet given at the end of this page. Pinout Configuration Pin Number Pin Name Description 1 Gate Controls the biasing of the MOSFET 2 Drain Current flows in through Drain 3 Source Current flows out through Source Where to use IRFZ44N MOSFET The IRFZ44N is known for its high drain current and fast switching speed. Adding to that it also has a low Rds value which will help in increasing the efficiency of switching circuits. The MOSFET will start turning on with a small gate voltage of 4V, but the drain current will be maximum only when a gate voltage of 10V is applied. If the mosfet has to be driven directly from a microcontroller like Arduino then try the logic level version IRLZ44N mosfet. Difference between IRLZ44N and IRFZ44N Mosfet The IRLZ44N and IRFZ44N MOSFETs are often confused among each other and used incorrectly. The IRLZ44N is a Logic level Mosfet with a very low gate threshold voltage of 5V, meaning the MOSFET can be fully turned on with just 5V on its gate pin which avoids the need for a driver circuit. The IRFZ44N on the other hand requires a gate driver circuit if the MOSFET has to be turned on completely using a microcontroller like Arduino. However it does turn on partially with direct 5V form a I/O pin, but the output drain current will be limited. How to use IRFZ44N MOSFET Unlike transistors MOSFET’s are voltage controlled devices. Meaning, they can be turned on or turned off by supplying the required Gate threshold voltage (VGS). IRFZ44N is an N-channel MOSFET, so the Drain and Source pins will be left open when there is no voltage applied to the gate pin. When a gate voltage is applied these pins gets closed. If it is required to be switched with Arduino, then a simple drive circuit using a transistor will work to provide the required gate voltage to trigger the MOSFET to open fully. For other switching and amplifying applications, a dedicated MOFET Driver IC is required. IRFZ44N with 5V gate (Arduino) If the MOSFET gate pin is directly connected to an I/O pin of a microcontroller like Arduino, PIC, etc. Then it will not open completely and the maximum drain current will depend on the voltage applied to the gate pin. The below graph shows how much drain current is permitted for gate threshold voltage from 4V to 10V. As you can see the MOSFET opens completely only when the gate voltage is around 10V. If it is somewhere around 5V then the drain current is limited to 20A and so on. Applications: Switching high power devices Control speed of motors LED dimmers or flashers High Speed switching applications Converters or Inverter circuits Package includes: 1x IRFZ44N N-Channel Power MOSFET Transistor 49A-55V-17.5mΩ TO-220 IRFZ44N-Datasheet

From the supplier's page.

Visit Makers Electronics

makhzan doesn't sell — every offer opens the supplier's own site.

IRFZ44N N-Channel Power MOSFET Transistor 49A-55V-17.5mΩ TO-220 · makhzan