eSUN PLA+ 1.75mm 3D Printer Filament – 1kg

Description

eSUN PLA+ 1.75mm 3D Printer Filament eSUN PLA+ 1.75mm 3D Printer Filament offers smooth extrusion, good dimensional stability, and improved toughness for reliable FDM 3D printing. Each spool contains 1kg net filament and suits decorative models, prototypes, functional parts, and educational projects. The modified PLA+ formula provides greater strength and resistance to breakage than standard PLA. In addition, its low-warping characteristics make it suitable for beginners and experienced 3D-printing users. Key Features Genuine eSUN PLA+ filament Standard 1.75mm filament diameter 1kg net filament weight Stronger and tougher than standard PLA Smooth and consistent extrusion Good layer adhesion Low warping during printing Suitable for detailed models Wide selection of available colors Compatible with most 1.75mm FDM printers Suitable for standard and high-speed printers Technical Specifications Brand: eSUN Material: PLA+ Filament Diameter: 1.75mm Net Weight: 1kg per spool Material Density: Approximately 1.24g/cm³ Recommended Nozzle Temperature: 210–230°C Recommended Bed Temperature: 45–60°C Recommended Cooling Fan: 100% Maximum Recommended Speed: Below 300mm/s Drying Recommendation: 50°C for 8–12 hours when required Printer Technology: FDM / FFF Available Colors: Select from the available product variations Recommended Printing Settings Start with a nozzle temperature of approximately 215–220°C and a heated-bed temperature of 50–60°C. Then adjust the settings according to the selected color, printer, nozzle size, layer height, and printing speed. For high-speed printing, increase the temperature gradually within the recommended range. However, the maximum practical speed depends on the printer’s hotend flow, motion system, cooling, and slicer profile. Always run a temperature test when using a new printer or color. Applications This PLA+ filament works well for: Functional prototypes Mechanical models Decorative prints Figures and miniatures Electronic enclosures Robotics components Educational projects Architectural models Cosplay accessories Replacement parts Household organizers General-purpose 3D printing Storage and Filament Care Store the spool in a sealed bag or dry container after use. Moisture can cause popping sounds, stringing, rough surfaces, and inconsistent extrusion. If the filament absorbs moisture, dry it at approximately 50°C for 8–12 hours using a suitable filament dryer. Avoid excessive drying temperatures because they may deform the spool or soften the filament. Insert the loose filament end into the spool holes after printing. This step prevents tangles during the next use. Compatibility Notes The filament works with most open-material FDM printers that accept 1.75mm filament. Examples include compatible models from Elegoo, Creality, Anycubic, Bambu Lab, Prusa, and other manufacturers. Actual results depend on printer calibration and slicing settings. Therefore, adjust temperature, retraction, flow, and cooling when necessary. Package Includes 1 × eSUN PLA+ 1.75mm Filament Spool Net Filament Weight: 1kg Note: Select the required color before adding the product to the cart. Printed models and 3D printers shown in images are not included.

From the supplier's page.