ESUN ePA 3D Filament 1.75mm 1Kg Roll for 3D Printer-NATURAL

Description

ePA Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing. Description Development based on nylon 6/66 copolymer; Self-lubricating wear resistance makes it suitable for printing gears; High toughness and impact resistance, with an elongation at break of up to 175%, which can print strong and durable parts with high fracture resistance; Low shrinkage, not easy to warp and crack when printing. Sellingpoint High toughness High impact resistance Self-lubricating wear-resisting Excellent printability Filament Properties Table 3D PRINTING FILAMENT ePA Density(g/cm 3 ) 1.12 Heat Distortion Temp(℃,0.45MPa) 50 Melt Flow Index(g/10min) 12.3(230℃/2.16kg) Tensile Strength(MPa) 52.45 Elongation at Break(%) 175.32 Flexural Strength(MPa) 58 Flexural Modulus(MPa) 1370 IZOD Impact Strength(kJ/㎡) 18.4 Durability 10/10 Printability 8/10 Recommended printing parameters Extruder Temperature(℃) 260 – 290℃ Recommended temperature：280℃ Bed temperature(℃) 70 – 90°C Fan Speed 0% Printing Speed 40 – 100mm/s Heated Bed Required Recommended Build Surfaces Solid glue, PEI Feature Flexible √ Elastic —— Impact Resistant √ Soft —— Composite —— UV Resistant —— Water Resistant —— Dissolvable —— Heat Resistant √ Chemically Resistant —— Fatigue Resistant √ Need drying √ Heated Bed Required √ Print recommend Drying at 70℃/>12h

From the supplier's page.