UNI-T UPO2204 Mixed-signal Oscilloscope 4-Channels 200MHZ

Description

UNI-T UPO2204 Mixed-signal Oscilloscope 4-Channels 200MHZ The UNI-T UPO2204 is a high-performance mixed-signal digital phosphor oscilloscope (MSO) featuring 4 analog channels with 200 MHz bandwidth and a real-time sampling rate of 2 GSa/s, plus 16 optional digital channels sampled at 1 GSa/s. Each channel boasts a deep 56 Mpts memory, enabling capture of long-duration waveforms without loss of detail. In Fast Acquire mode, the waveform capture rate reaches 1,000,000 wfms/s, making it easy to detect rare glitches or anomalies in complex signals . The UPO2204 supports an extensive set of trigger modes, including edge, pulse width, video, runt, timeout, delay, duration, setup/hold, Nth-edge, and area triggers. It also offers serial-bus triggers and decoding for RS232/UART, I²C, SPI, CAN, CAN-FD, LIN, and FlexRay, all performed in hardware on the full 56 Mpt record for near-instantaneous protocol analysis . Users can perform 36 automatic measurements (frequency, rise/fall time, duty cycle, area, RMS, phase, etc.) and apply advanced math functions—addition, subtraction, multiplication, division, logic operations, digital filtering, and a 4 Mpt FFT with waterfall and marker measurement. The front panel integrates an 8-inch, 800×480 capacitive-touch TFT display with Ultra Phosphor technology providing up to 256-level grayscale and gesture support (zoom, drag, edit). Split-screen (Multi-Scopes) and XY modes simplify phase and comparative measurements. Connectivity includes USB Host/Device, LAN, EXT Trig, AUX Out (Trig Out/Pass-Fail), and VGA, with full SCPI command support and web-based remote control for automated test setups. Additional features include a built-in dual-channel 50 MHz AWG, a Bode-plot loop-test function, and uninterrupted hardware recording of up to 120,000 frames. Compact and robust, the UPO2204 delivers professional-grade mixed-signal analysis in R&D, education, production test, and field-service environments. Features: Analog channel bandwidth: 200MHz, 100MHz Real time sampling rate of analog channel 2GSa/s Real time sampling rate of digital channel 1GSa/s (only MSO) Number of analog channels: 2 or 4 Storage depth of each channel: 56Mpts 16 digital channels, storage depth 56Mpts (only MSO) Waveform capture rate up to 1,000,000 wfms/s Built in 50MHz dual channel function / arbitrary waveform generator (only MSO-S). It supportsreal-time loading of oscilloscope screen data to AWG arbitrary wave output. Support Bode Plot loop test and analysis function Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation) 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection settingandmark measurement, etc. Auto measurement of 36 waveform parameters Supports parameter measurement while scanning Multi-Scopes supports multi-channel independent trigger and fluorescent display Multi-channel independent 7-bit hardware frequency counter DVM supports multi-channel independent AC / DC true RMS measurement Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration,setup/hold, Nth edge and pattern trigger Area trigger function, which can be used to capture accidental signals and observe complex signals Protocol trigger and decoding function (optional)：RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay Ultra Phosphor super fluorescent display effect, up to 256 levels of gray display 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc. Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out Pass/Fail), AWG, VGA Support SCPI programmable instrument standard commands Support web access and control Specifications: Feature Specification Model Number: UPO2204 Scope Type: UPO Bandwidth: 200 MHz Channels: 4 Analog Real-Time Sample Rate: 2 GSa/s Rise Time: ≤1.8 ns Memory Depth: 56 Mpts Waveform Capture Rate: 1,000,000 wfms/s Input Impedance (Analog): (101 kΩ ±1%) Input Impedance (Digital): – Waveform Generator: No Display: 8-inch TFT LCD Touchscreen: Yes Shipping Dimensions (L×W×H): 19 in × 8 in × 12 in Applications: Communication Systems Semiconductor and Computer Electronics Industrial and Consumer Electronics Automotive Electronics On-site Maintenance and Field Testing Research and Development (R&D) Education and Training Package Included: 1x Digital Oscilloscope 1x Power cord 1x USB2.0 printing cable 1x UT-P05 Passive Probe (200MHz) 1x UT-P04 Passive Probe (100MHz) UNI-T UPO2204 Documents: User Manual Datasheet Quick Start Guide Programming Manual Software Download Firmware Download

From the supplier's page.