Night Vision Infrared IR LED Lights for Raspberry Pi Camera

Description

This Infrared IR LED Light is usually used with Raspberry Pi camera. It allows adding night vision function to RPi camera and achive better vision. 3W high-power 850 infrared LED Onboard photoresistor, the ambient light detector Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED When ambient light is lower than threshold value, the infrared LED is on, vice versa Small size and Lightweight module. Easy to use. Specifications Input Voltage DC 3V-5V Current 500mA-2A Infrared Power 3W Night Vision Distance 3-6m IR Wavelength 850 nm Lens Range Suitable for lens with 3.6mm focal length How to use Connect the Infrared LED Board to the camera PCB by screws The screw holes are used for both attachment and power supply Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically When ambient light is lower than threshold value, the infrared LED is on, vice versa Please Note That: Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested. Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines. Packing list: 1 x 3W Infrared LED for RPi NoIR Camera Module 1 x Screws and nuts set

From the supplier's page.