Servo Motor (Half Metal) MG945 TowerPro 180 Degree
EGP 195
See other suppliers →Description
The MG996R is a metal gear servo motor with a maximum stall torque of 11 kg/cm. Like other RC servos, the motor rotates from 0 to 180 degrees based on the duty cycle of the PWM wave supplied to its signal pin. Wire Configuration Wire Number Wire Colour Description 1 Brown Ground wire connected to the ground of system 2 Red Powers the motor typically +5V is used 3 Orange PWM signal is given in through this wire to drive the motor MG996R Servo Motor Features The operating Voltage is +5V typically Working voltage: 4.8-6V Stall Torque: 10.5kg/cm (4.8V) Stall Torque: 13kg/cm (6V) Operating speed: 0.20sec/60 degrees (4.8V no load) Operating speed: 0.17sec/60 degrees (6.0V no load) Rotation angle: 0-180 degrees Gear Type: Metal Servo wire length: 30cm Package includes gear horns and screws
From the supplier's page.
makhzan doesn't sell — every offer opens the supplier's own site.