TMC2208 V1.2 Stepping Motor Mute Driver Stepstick Silent

Description

TMC2208 Stepper Motor Driver Module MC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing. This product is known as 3D Printer TMC2208 Stepstick Stepper Motor Driver Module + Heat Sink, TMC2208 Stepper Motor Driver Module with Heat Sink for 3D Printer Part Features: Configuration: Step/DIR or UART Micro-steps: 1/256 Current Loading: 1.2A continuous, 2A peak Supply Voltage: 4.75 ~ 36V Single Wire UART: for advanced configuration options Features/Specs: Model: TMC2208 Interface: Step/Dir Configuration: CFG Pins or UART Native Micro steps: Up to 1/256 MicroPlyer Micro steps: 1/256 Logic Voltage VIO: 3 ~ 5V Motor Voltage VM: 5.5 ~ 36V Motor Phase Current: 1.2A RMS, 2.0A Peak Internal V-Regulator: Enabled Size (LxWxH) : 20 x 15 x 11 mm Note !!!: Make sure not to connect the motor when measuring voltage, otherwise driver will burn out. When used on Ramps1.4 or MKS Gen, please remove the 3 jumpers under socket. Pay attention to direction, don’t insert wrongly, or it will burnt out. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to replace A4988. Package Includes: 1 x TMC2208 Stepper Motor Driver Module 1 × Heat Sink 1 × Screwdriver

From the supplier's page.