XL4016E1 DC-DC 10A 300W STEP-DOWN MODULE (7.0-40V to 1.25-36V)

Description

XL4016E1 DC-DC 10A 300W STEP-DOWN MODULE (7.0-40V to 1.25-36V) Description The DC-DC step-down converter is a non-synchronous non-isolated converter based on XL4016E1 has independent current and voltage regulation and is excellent for building power supplies for LED modules or battery chargers, as well as adjustable power supplies. With the help of this converter, you can charge Li-ion, NiCd, NiMH batteries for 4V, 6V, 12V, 14V, 24V, but since there is no protection against polarity reversal, you must not forget to put a restrictive diode at the output in this case. On the board there is a current limit indicator, which is necessary when charging batteries with this converter, the lower the current consumption, the less the LED shines. Fixation of contacts to the board is carried out without soldering using contact blocks. DC-DC XL4016E1 features: Input Voltage: 7.0… 40 V Output voltage: 1.25… 36 V Operating Output Current: 8A Maximum Output Current: 10A Output Maximum Power: 300W Operating Frequency: 300KHz Output Current Adjustment Range: 0.3… 10 A No-load current: ≤20 mA Output Ripple: 50mV Protection features: from short circuit at the output: yes from polarity reversal: no From overheating: yes Current limit indication: yes Efficiency: ≤95% Operating Temperature: -40… 85 ℃ Operating Frequency: 300KHz Dimensions: 65×50×25 mm Assign contacts XL4016E1: IN : Input Supply Voltage IN-: – input supply voltage OUT : Output voltage OUT-: – output voltage Parameter adjustment: Output voltage adjustment Output Current Adjustment When operating at maximum power above 65°C, ensure proper cooling with a fan. There is no protection against incorrect polarity in the XL4016E1 10A module, please observe the polarity when used as a charger Tutorials: XL4016E1 Buck Converter Module Review (300W 9A) Videos:

From the supplier's page.