SIM7600E-H 4G HAT for Raspberry Pi, LTE Cat-4 4G / 3G / 2G, GNSS

Description

SIM7600E-H 4G HAT for Raspberry Pi , LTE Cat-4 4G/3G/2G, GNSS The SIM7600E-H 4G HAT for Raspberry Pi is an advanced communication module that adds LTE Cat-4 connectivity and GNSS capabilities to Raspberry Pi applications. It supports multiple communication modes including 4G, 3G, and 2G, and integrates a GNSS module compatible with GPS, BeiDou, GLONASS, and Galileo systems. Designed for seamless integration with Raspberry Pi boards, it is ideal for IoT, mobile communication, and positioning projects. This HAT also includes features such as USB connectivity, onboard voltage regulation, and antenna interfaces for reliable and high-performance operation. Features Compatible with Raspberry Pi series boards and Jetson Nano. Supports LTE Cat-4 with download speeds up to 150Mbps and upload speeds up to 50Mbps. Enables voice calls, SMS, MMS, email, and internet protocols such as TCP, UDP, HTTP, FTP. Supports GPS, BeiDou, GLONASS, and LBS base station positioning. Onboard USB interface for testing AT commands and accessing GPS data. Includes CP2102 USB to UART converter for serial debugging. Breakout UART control pins for connecting with host boards like Arduino or STM32. SIM card slot supporting 1.8V/3V SIM cards. TF card slot for data storage. Onboard audio jack and audio decoder for making telephone calls. LED indicators for monitoring operating status. Configurable operating voltage of 3.3V or 5V via jumper. Supports control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set). Includes development resources and manual with examples for Raspberry Pi, Arduino, and STM32. Specifications Parameter Value Cellular Network LTE Cat-4, 3G, 2G LTE Bands FDD: B1/B3/B5/B7/B8/B20 TDD: B38/B40/B41 3G Bands UMTS/HSPA+: B1/B5/B8 2G Bands GSM/GPRS/EDGE: 900/1800MHz GNSS Systems GPS, BeiDou, GLONASS GNSS Receiver Type 16-channel, C/A code GNSS Sensitivity Tracking: -159dBm (GPS), -158dBm (GLONASS) GNSS Cold Start <35s GNSS Hot Start <1s GNSS Position Accuracy <2.5m CEP Operating Voltage 3.3V/5V (configured via jumper) Power Supply 5V Operating Temperature -30°C to 80°C Storage Temperature -45°C to 90°C Dimensions 56.21mm × 65.15mm PINOUT SIM7600E-H CP2102 USB to UART Converter NAU8810 Audio Decoder TXS0108EPWR Voltage Translator – Translates 3.3V/5V to 1.8V MP2128DT Power Chip MP1482 Power Chip Raspberry Pi GPIO Header – For connecting with Raspberry Pi SIM7600 Control Interface – For connecting with host boards like Arduino/STM32 SIM Card Slot – Supports 1.8V/3V SIM cards TF Card Slot – Allows file/SMS/etc. storage 3.5mm Earphone/Mic Jack USB Interface – For testing AT commands, getting GPS data, etc. USB to UART Interface – For serial debugging or logging into Raspberry Pi MAIN Antenna Connector AUX Antenna Connector GNSS Antenna Connector Power Switch Network Status Indicator Power Indicator Operating Voltage Selection Jumper: VCCIO – 3.3V: Set operating voltage to 3.3V VCCIO – 5V: Set operating voltage to 5V UART Selection Jumper: A: Access Raspberry Pi via USB to UART B: Control SIM7600 using Raspberry Pi C: Control SIM7600 via USB to UART Applications IoT and M2M communication. Vehicle tracking and fleet management. Remote data acquisition and monitoring. Smart agriculture and environmental monitoring. Emergency communication systems. Industrial automation and control. Compatible With Raspberry Pi Series Boards and Jetson Nano Package Contents 1x SIM7600E-H 4G HAT Board. 1x LTE Antenna. 2x U.FL cables. 1x GPS External Antenna (B). 1x 35cm USB Type-A to Micro-USB Cables. 1x 120cm USB Type-A to Micro-USB Cables. 1x Raspberry Pi Screws Pack (2pcs). Documents SIM7600E-H 4G HAT Board Datasheet. SIM7600E-H 4G HAT Board Wiki. SIM7600E-H Chip Documentation.

From the supplier's page.