Liquid PH Value Detection Sensor E-201-9 Ph0-14 With PH Electrode Probe BNC Monitoring Control Board

Description

Liquid PH Value Detection Sensor E-201 Ph0-14 With PH Electrode Probe BNC Monitoring Control Board This is a Liquid pH Value Detection Sensor for Arduino. This is used in water quality testing and Aquaculture The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The total pH scale ranges from 1 to 14 , with 7 considered to be neutral . A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline. The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings. Connection Diagram of Liquid pH Value Detection Sensor for Arduino: This is Electrode Probe for Liquid pH Value Detection Sensor Module. Need to measure water quality and other parameters but haven’t got any low-cost pH meter? Find it difficult to use with Arduino? The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various fields to be detected in the pH. The PH electrode has a single cylinder that allows direct connection to the input terminal of a PH meter, controller, or any PH device which has a BNC input terminal. The PH electrode probe is accurate and reliable that can give almost instantaneous readings. Features : BNC Connector is suitable for most PH meter and controller. Suitable for a wide range of application: Aquariums, Hydroponics, Laboratory, etc. Specification of Electrode Probe : pH Range 0-14 pH Operating Temperature (°C) 0 to 80 Zero Point 7±0.5 pH Alkali Error 0.2 pH Theoretical Percentage Slope ≧98.5% Internal Resistance ≦250MΩ Response Time ≦2min Terminal Blocks BNC plug Total Probe Length (m) Approx 1m Weight (gm) 56 Shipment Weight 0.07 kg Shipment Dimensions 24 × 4 × 4 cm Specification of Liquid pH Value Detection Sensor: Heating Voltage (V) 5±0.2 Working Current (mA) 5 to 10 Detection Concentration Range PH0-14 Detection Range of Temperature (°C) 0 to 60 Response Time (s) ≤5 Stability Time (s) ≤60 Power Consumption (W) ≤0.5 Operating Temperature (°C) -10 to 50 Working Humidity (%RH) 95 PCB Size ( L x W ) mm 42 x 32 Height (mm) 16 Weight (gm) 20 Shipment Weight 0.022 kg Shipment Dimensions 8 × 4 × 2.5 cm Package Includes : 1 x Electrode Probe for Liquid pH Value Detection Sensor Module. 1 x Liquid pH Value Detection Sensor For Arduino 1 x set of Mounting Accessories

From the supplier's page.