CP2102(6-pin) USB 2.0 to TTL UART serial converter

CP2102(6-pin) USB 2.0 to TTL UART serial converter This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. ThisCP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement. Supported operating systems Windows 98/Me/2000/7 MAC OS-9 MAC OS X-Windows CE Linux 2.40 or later Features : Brand new and high quality Included USB transceiver, without external circuit device Includes a clock circuit and power-on reset circuit With 3.3V and 5V dual power output With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status Meet the USB2.0 specification requirements SUSPEND pin supports USB suspend state With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader With reset signal output, etc. directly to the Arduino board Promini download! Asynchronous serial data bus compatible with all handshake and modulation controller interface signals The supported data format is 8 data bits, 1 stop bit and parity bits Connotation 512 byte receive buffer and 512 bytes transmit buffer Supports hardware handshaking or X-ON/X-OFF Package Includes : 1 x CP2102(6-pin) USB 2.0 to TTL UART serial converter module Length (mm) 42 Width (mm) 16 Height (mm) 6 Weight (gm) 4 Shipment Weight 0.005 kg Shipment Dimensions 5 × 4 × 3 cm

The PL2303 TA USB to TTL Serial Cable lets you connect microcontrollers and serial devices directly to your computer’s USB port. It uses the Prolific PL2303TA chipset , which provides stable and fast serial communication , making it ideal for Arduino, ESP32, STM32, and Raspberry Pi debugging or programming . This cable converts USB signals to TTL-level serial data , allowing you to upload firmware, monitor serial output, or communicate with embedded systems. It includes clearly labeled wires for TX, RX, VCC, and GND , making it easy to connect correctly to your target device. The PL2303 TA offers full support for baud rates up to 1Mbps and works with major operating systems like Windows, macOS, and Linux . In addition, it features built-in protection circuits that ensure reliable operation and protect your hardware from voltage mismatch. Because it’s plug-and-play , you can quickly start serial communication without needing external converters or drivers (for most systems). It’s perfect for debugging, firmware flashing, and serial terminal testing . Key Features: Model: PL2303 TA USB to TTL Serial Cable Chipset: Prolific PL2303TA Interface: USB to 4-pin TTL (TX, RX, VCC, GND) Baud Rate: Up to 1Mbps Operating Voltage: 3.3V / 5V compatible Plug-and-play operation (drivers available if needed) Compatible with Windows, macOS, and Linux Ideal for Arduino, ESP8266, ESP32, and STM32 serial communication The PL2303 TA USB to TTL Cable helps students, hobbyists, and engineers easily program, debug, and communicate with microcontroller-based devices.

CP2102 USB to TTL Converter Red Package Includes: 1x CP2102 USB to TTL Converter Documents: Tutorial Datasheet Related Products: IC Programmers | Testers | Data Converters