
74373 Eight Latches with 3-State Outputs IC DIP-20
Part number 74373
- Sold by 2 shops · in stock at 2 · EGP 15
- 8 similar products, from EGP 15
Offers
lowest price firstEach offer shows the shop's own title.
- 74373 Eight Latches with 3-State Outputs IC DIP-20checked 22 days agoEGP 15
- 74373 IC eight latches with 3-state outputsPrice may be out of date (76 days)EGP 15
What the shops say
From Makers Electronics's listing
Description
74373 Eight Latches with 3-State Outputs IC DIP-20 The 74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. Features: Typical propagation delay: 18 ns Wide operating voltage range: 2 to 6 volts Low input current: 1 µA maximum Low quiescent current: 80 µA maximum (74 Series) Output drive capability: 15 LS-TTL loads Specifications: Parameter Specification Supply Voltage (VCC − 0.5 to + 7.0V Input Voltage (VIN) −1.5VCC + 1.5V Output Voltage (VOUT) − 0.5 to VCC + 0.5V Clamp Diode Current (IIK, IOK) ± 20 mA DC Output Current, per pin (IOUT) ± 35 mA DC VCC or GND Current, per pin (ICC) ± 70 mA Storage Temperature Range (TSTG) − 65°C to + 150°C Power Dissipation (PD) (Note 4) 600 mW S.O. Package only 500 mW Lead Temperature (TL) (Soldering 10 seconds) 260°C Pinout: Applications: Binary counters. Frequency divider circuits. Toggle and state-control circuits. Sequential logic systems. Digital timing circuits. Data storage and state machines. Educational digital electronics projects. Packages Included: 1 × 7473 Dual Master-Slave J-K Flip-Flops IC, DIP-14. Document: 74373 IC Datasheet
Read moreShow less
From Micro Ohm's listing
Description
74373 datasheet
Similar products
74HC76 Dual JK Flip-Flop with Set and Clear – 7476EGP 15 – 21.903 shopschecked 18 days ago- TL082CPEGP 151 shopchecked 14 days ago
74LS74 Dual D-type Flip Flop with Set and Reset – 7474EGP 151 shopchecked 21 days ago
74151 Multiplexer Single 8:1 5V 29mA IC DIP-16EGP 151 shopchecked 22 days ago
74HC175 (Quad D-type Flip-flop With Reset)EGP 15 – 293 shopschecked 17 days ago
DTMF Reciever MT8870EGP 151 shopchecked 13 days ago
4071 IC "Quad 2-input OR Gate"EGP 151 shopPrice may be out of date (76 days)
74HC195 – 74195 ( 4-bit parallel access shift register )EGP 15 – 353 shopschecked 17 days ago
