



Mini MP3 Player Module For Arduino
From the shop's description
Mini MP3 Player Module For Arduino A module that allows you to play music files directly from micro SD card via the built-in slot. It communicates through the UART interface – pins RX and TX, with a microcontroller. DFPlayer works with Mp3, WAV, WMA, supports file systems FAT16 and FAT32. Features: Supports MP3 and WAV file decoding Supports FAT16 and FAT32 file system Supports sampling rates (kHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 24-bit DAC output supports 90dB and SNR 85dB Supports stand-alone pushbutton (AD Key) control mode Supports serial control by microcontroller Supports USB connection for direct file upload/download to SD card Supports up to 32GB micro-SD card Supports thousands of files for playback supports random playback Built-in 3-watt amplifier can directly drive a small speaker 30 levels adjustable volume and 6 levels adjustable EQ Busy output available for monitoring play state 3.3V logic compatible 5V module operation Leads: soldered goldpin connectors 2.54 mm pitch PINOUT: PIN DESCRIPTION VCC Voltage in the range from 3.2 to 5.0 V. RX Serial interface UART – receiver. TX Serial interface UART – transmitter. DAC_R Audio output for headphones or amplifier – right. DAC_L Audio output for headphones or amplifier – left. SPK2 Output for speaker with power up to 3 W. GND Mass. SPK1 Output for speaker with power up to 3 W. IO1 Liberating input, short hold, switches track, long silences. GND Mass. IO2 Liberating input, short hold, switches track, long increases the volume. ADKEY1 Liberating input, ADKEY2 Liberating input USB+ Data line of interface USB D+. USB Data line of interface USB D-. BUSY The status output. Low state means that the currently playing track, high on the contrary. Specifications: Operating Voltage 4.5 – 5VDC (recommended) MP3 Audio Formats 8/11.025/12/16/22.05/24/32/44.1/48 (kHz) MP3 Audio Decoding 11172-3 and ISO13813-3 Layer3 audio decoding USB Port USB 2.0 UART Port 3.3V TTL Level Serial Port Module Dimensions 20.5 x 20.5mm Applications: Car navigation voice broadcast; Road transport inspectors, toll stations voice prompts; Railway station, bus safety inspection voice prompts; Electricity, communications, financial business hall voice prompts; Vehicle into and out of the channel verify that the voice prompts; The public security border control channel voice prompts; Multi-channel voice alarm or equipment operating guide voice; The electric tourist car safe driving voice notices; Electromechanical equipment failure alarm; Fire alarm voice prompts; The automatic broadcast equipment, regular broadcast Resources: Downloadable Arduino library Arduino connection instructions
Read moreShow less
Similar products
85mm Robot Tire Wheel With 4mm Connector and 25GA Motor Mounting BracketEGP 1101 shopchecked 18 days ago
Opto-isolated AC Input Detector Module 8 Channel ACD8EGP 1101 shopchecked 18 days ago
DC 10A PWM Motor Speed Controller Low Voltage Adjustable Drive ModuleEGP 1101 shopPrice may be out of date (74 days)
CP2102(6-pin) USB 2.0 to TTL UART serial converterEGP 110 – 1604 shopschecked 11 days ago
Dual Micro USB 3.7V to 5V 2A Boost Mobile Power Bank DIY 18650 Lithium Battery ChargerEGP 1101 shopPrice may be out of date (74 days)
XD-621B On Off Touch Switch Mirror 6-12V DCEGP 1101 shopchecked 11 days ago
Cable For Arduino UNO/MEGA (USB A to B) 5 Meter BlueEGP 1101 shopPrice may be out of date (74 days)
Lithium Battery Charger Protection Module (BMS) 4S 5A 14.8VEGP 1101 shopchecked 11 days ago