PL2303 TA USB to Serial UART TTL Cable

PL2303 TA USB to Serial UART TTL Cable The PL2303 TA USB to Serial Bridge Controller Cable, based on the Prolific PL2303TA chip, is a high-performance, cost-effective solution for connecting RS-232 serial devices to your computer’s USB port. This cable enables seamless integration of legacy serial devices with modern systems, making it an essential tool for a variety of applications. Its compact design and low power consumption make it ideal for both mobile and embedded solutions. Features : • Full compliance with USB Specification v2.0 (Full-Speed) • Integrated USB 1.1 transceiver, 5V to 3.3V regulator, and 12MHz crystal oscillator • Supports RS-232 like serial interface with full-duplex communication (TXD and RXD) • Detects parity errors, frame errors, and serial breaks • Supports remote wake-up from MODEM input signals Specifications : Specification: Details USB Interface: USB 2.0 Full-Speed Serial Interface: RS-232 like, full-duplex Baud Rate: 75 bps to 6,000,000 bps Parity: None, Even, Odd, Mark, Space Flow Control: Hardware (CTS/RTS), Software (XON/XOFF) Buffer Size: Configurable (256-byte out/256-byte in or 128-byte out/384-byte in) Power Consumption: Low in both operating and suspend modes Applications : • Connecting legacy serial devices (e.g., modems, printers, industrial equipment) to modern computers • Debugging and programming microcontrollers and embedded systems • Interfacing with scientific instruments and measurement devices • Configuring network devices such as routers and switches via serial console ports • Point-of-sale systems for connecting barcode scanners and receipt printers • Industrial automation for controlling machinery and robots with serial communication Datasheet : • PL2303TA

This is PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial. The cable is the easiest way ever to connect to your microcontroller / Raspberry Pi /WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four wire – red power, black ground, white RX into the USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V levels for interfacing with the most common 3.3V logic level chipsets. Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or BeagleBone Black. Also handy for hacking WiFi routers to install alternate OS’s, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated. Pin Connection Red: +5 V Black: GND White: RXD Green: TXD Applications: Single-chip upgrade solution for Legacy RS232 devices to USB interface USB to RS232 converters/cables/dongles Healthcare/Medical USB Interface Data Transfer Cable Personal Infotainment/Media Player Docking USB Interface Cellular/PDA USB Interface Data Transfer Cable Serial-over-IP Wireless Solution USB Barcode/Smart Card Readers GPS/Navigation USB Interface Point-of-Sale (POS) Terminals/Printers PC Docking Station/Port Replicators Industrial/Instrumentation/Automation Control USB Interface Features : Built-in TTL COM PC-PL2303HX Chip. Standard USB type and TTL 4 pin connector Simple and Easy way to give USB support to your designs Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8 Package Includes : 1 x PL2303 TA Download Cable USB to TTL RS232 Module. Model Type: RS232 Module Weight (g): 30 Cable Length (m): 1 Shipping Weight 0.033 kg Shipping Dimensions 10 × 7 × 3 cm