XL6009 4A DC-DC Adjustable Step-up Power Module With LED Voltmeter

XL6009 is a 4A switch current high-performance boost ( BOOST ) module. This module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, and its performance far exceeds that of the first-generation technology LM2577. The XL6009 booster module has a lower cost and better performance, and the LM2577 module is about to be eliminated. Features: XL6009 Step-up Power Module uses XL6009 as the main control chip to realize the broader scope of applications for boosting. It shows the adjusted results intuitively with the digital tube. There is no need to use the multimeter, which will be more convenient. Equipped with the Schottky diode, you need not be worried about wrong operation. It adds a ventilation hole on the PCB to enhance the capacity of heat dissipation. The booster below 5V works normally, but the digital tube does not work Built-in 4A high-efficiency MOSFET switch tube, making the efficiency up to 94%( LM2577 current is only 3A ). Ultra-high switching frequency of 400KHz can achieve very good results with a small-capacity filter capacitor, the ripple is smaller and the volume is smaller. (The frequency of LM2577 is only 50KHz ). With input display indicator and output display indicator, the IN indicator lights when the digital tube displays the input voltage, and the OUT indicator lights when the digital tube displays the output voltage. With overheat protection and short circuit protection Specifications: Module Feature: Non-Isolation Booster Attenuator System: Not Synchronous Rectifier Input Voltage: 3V- 32V Output voltage: 5V-40V Incoming current: 4A (maximum) Transmission efficiency: 94% (highest) normal efficiency for 85% Switching frequency: 400KHz Output ripple: 50mV Load regulation: ±0.5% Voltage regulation: ±0.5% Operating temperature: -40°~+85° Size: 66mmx36mm Pins Out: IN+ input positive IN- input negative OUT+ output positive OUT- output negative Functions : 1. short press : input/output display options 2. moderate press : enter the adjustment state. Increase or decrease the offset (the default value is 0), when the voltage shows incorrect usage. Short according to the regulation, long or long according to the restoration 3. Long press : the status of low power consumption, the digital tube and the lights are off, the normal operation of the module. Click on the button again to restore. Normal display screen The hands of the clock to adjust the output voltage : The hands of the clock, —– increase in tension The hands of the clock —- reduce the voltage

XL6009 4A DC-DC Step Up Power Supply Module With Display Highlight Walk-In Price: RM17.5 Warranty: 1 Month (T&C Apply) 4A Switching Power High-Performance Boost Module Input range: 3V to 32V Output range: 5V to 35V Maximum output current: 4A Output Ripple: 50mV Conversion efficiency: <94% ( Lower efficiency when higher pressure difference occur ) ​​ DESCRIPTION 4A Switching Power High-Performance Boost Module Input range: 3V to 32V Output range: 5V to 35V Maximum output current: 4A Output Ripple: 50mV Conversion efficiency: <94% ( Lower efficiency when higher pressure difference occur ) Switching Frequency: 400KHz Load Regulation: /- 0.5% Voltage Regulation: /- 0.5% Operating Temperature: -45℃ to 85℃ Dimension : 60mm * 35mm * 13.5mm Weight: 24g ​​ PACKAGE INCLUDE 1 x XL6009 4A DC-DC Step Up Power Supply Module with Display

XL6009 4A DC-DC Adjustable Step-up Power Module With LED Voltmeter The DSN6009 is a high-performance boost (BOOST) module with 4A switching current. Wide input voltage 3V ~ 32V, the best operating voltage range is 5 ~ 32V Wide output voltage 5V ~ 35V Built-in 4A high-efficiency MOSFET switch, the efficiency of up to 94%; (LM2577 current is only 3A) High switching frequency of 400KHz, You can achieve very good results with a small capacity of the filter capacitor (LM2577 frequency is only 50KHz)