FL-C1210 PWM Solar Charger Controller 10A

Safety Instructions: Make sure battery has the enough voltage for the controller to recognize battery type before first installation. The battery cable should be as short as possible to reduce loss. Regulator is only suitable for lead-acid batteries: open, AGM, gel is not suitable for nickel metal hydride, lithium ions or other batteries. The charging regulator is only suitable for regulating solar power units. Never connect another charging source to the charging regulator. Product Fratures Build in a small industrial console. One-key setting, digital screen. Fully 4-stage Boom charge management. Built in short-circuit protection, open protection circuit, reverse protection, during load protection. Reverse current protection, low heat production. Specification Rated charge current: 10A Rated load current: 10A Work voltage: 12/24 V Auto Over load,short circuit protection: 1.25 rated load current 60 sec., 1.5 rated load current 5 sec. , over load protection action. ≥3 Rated load current short circuit protection action No load current: ≤6mA Charging circuit voltage drop: ≤0.26V Load circuit voltage drop: ≤0.15V Over voltage Protection: 14.8V Work temperature: industry stage -35C to +35C Boost charge voltage: 14.6V (keep 10min.) Direct charge voltage: 14.4V (keep 10min.) Float charge voltage: 13.6V Charge return voltage: 13.2V Lower voltage indicate: 12V Over discharge voltage: 11.1v (no load) Over discharge return voltage: 12.6V Controle mode: PWM charge mode;modified discharge voltage by the discharge rate Communication system Connect the battery to charge regulator – plus and minus. <1> will appear if 12 V detects a battery, <2> if 24 V detects a battery. Connect the solar heater unit to the regulator-plus and minus. The system reverse applies when uninstalling! Improper sequence arrangement can harm the controller! Setup / setting system Press the setup button to activate the display mode, press the button for 3 seconds, and select the desired mode. Show status description 0 charge only only use charge function from controller. The resulting load is forever closed 1-13 Light-open + delay load on after sunset and closed after 1-13hours L D2D dusk to dawn (delay) C system always load output (unless battery is low) H hand open download manually D patch dusk to dawn (no delay) Note: When the screen flashes on <vu>, the description has been in temperature, over current, or lost. Outside of short circuit protection, this time should reduce the load or eliminate the short circuit, after entering the protection, and solution in addition to the exceptiopn system will delay a period of time to open the output.

FL-C1210 PWM Solar Charger Controller 10A Made of high quality material, durable and practical. Stable performance, integrated industrial microcontroller, can run stably in cold, high temperature and humid environment. 12V/24V voltage automatic identification, intelligent and intelligent, to provide more convenience for your life. Large LCD screen ensures simple and intuitive operation. Dual USB Output – Easily connect to your phone to charge your phone fast and powerfully. Comprehensive protection, providing overcharge, over discharge, overload protection as well as short circuit and reverse connection protection. Wide range of loading work, easy to apply to different types of street lights and monitoring equipment. Wide range of applications, used for solar green lights, solar light billboards, solar insecticidal lights, solar power generation systems, marine solar power generation systems, solar power generation systems, etc. Solar charge controller only. Specification: Type: PWM Charger Controller Model: FL-C1210 Rated Voltage: 12-24Vdc Rated Current: 10A Dimensions: Length: 168mm Width: 92mm Hight: 42mm Material: Plastic, Metal Color: Orange and Black Package Includes: 1x PWM Solar Charger Controller Documents: User Manual Related Products: BATTERIES | ACCESSORIES SOLAR PANEL | INVERTER | CHARGER