ATTINY85 Digispark kickstarter mini USB Development Board

ATTINY85 Digispark kickstarter mini USB Development Board The ATTINY85 Digispark Kickstarter Mini USB Development Board is a compact and cost-effective microcontroller platform based on the ATTINY85 chip. Designed for simplicity and versatility, it offers seamless integration with the Arduino IDE (version 1.0+), making it accessible for both beginners and experienced developers. This board features a built-in USB interface, eliminating the need for external programmers. It can be powered directly via USB or through an external source ranging from 7 to 35V, thanks to its onboard 500mA 5V regulator. With 6 I/O pins (2 of which are shared with USB functionality), 8KB of flash memory (approximately 6KB available after bootloader), and support for I2C and SPI communication protocols, the Digispark board is well-suited for a variety of applications, including wearable devices, sensor projects, and compact automation systems. Features: • Microcontroller: ATTINY85 • Support for Arduino IDE 1.0+ (OSX/Win/Linux) • Power via USB or external source (7-35V) with automatic selection • Onboard 500mA 5V regulator • Built-in USB interface for programming and power • 6 I/O pins (2 shared with USB if actively communicating) • 8KB flash memory (approximately 6KB available after bootloader) • I2C and SPI communication (via USI) • PWM on 3 pins (additional via software PWM) • ADC on 4 pins • Power LED and test/status LED Specifications: Parameter: Details Microcontroller: ATTINY85 Operating Voltage: 5V (USB) or 7–35V (external) Flash Memory: 8KB (approx. 6KB usable) SRAM: 512 bytes EEPROM: 512 bytes Clock Speed: 16.5 MHz (default) Digital I/O Pins: 6 (2 shared with USB) PWM Outputs: 3 (plus optional software PWM) Analog Inputs: 4 (10-bit resolution) USB Interface: Built-in USB (micro-USB connector) Communication: I2C, SPI (via USI) Power Regulator: 5V / 500mA onboard regulator Board Dimensions: ~25 × 18 mm Applications: • Compact sensor monitoring • USB-powered gadgets • DIY home automation • Wearable devices • Beginner-friendly microcontroller projects Resources: • ATtiny85 Datasheet

Digispark ATTINY85 Mini USB Development Board Although small in size, great in capabilities. The Digispark ATTINY85 Mini USB Development Board is similar to the Arduino but cheaper and smaller (of course a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. Complete USB Development Board Cheap Enough to Leave in a Project. If you have never heard of the Digispark ATtiny board before, it may take you more than a moment to understand its full power and potential. So read this carefully: Firstly, it’s a 20MHz, AVR 8-bit microcontroller with 8 KB flash, 512 bytes of RAM You get up to 5 GPIOs, 4 ADCs, 2 PWMs, 1 SPI, and 1 I2C Secondly, it’s fully compatible with Arduino Thirdly, it can be directly programmed via USB without needing any other programmer! And finally, it is available at a cheap price!! The Digispark is shipped fully assembled except for the two included and easy to solder headers. Note: The Board is available in Black and Blue color we will ship it Randomly Features : High Performance, Low Power AVR® 8-Bit Microcontroller Non-volatile Program and Data Memories 8K Bytes of In-System Programmable Program Memory Flash Endurance: 10,000 Write/Erase Cycles 512 Bytes In-System Programmable EEPROM 512 Bytes Internal SRAM Peripheral Features Two High-Frequency PWM Outputs with Separate Output Compare Registers USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector 10-bit ADC 4 Single Ended Channels Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x) Speed Grade 0 – 10 MHz @ 2.7 – 5.5V, 0 – 20 MHz @ 4.5 – 5.5V Industrial Temperature Range Low Power Consumption Active Mode:1 MHz, 1.8V: 300 µA Package Includes : 1 x Digispark ATTINY85 Mini USB Development Board 1 x Berg Pin Item Type: Development Board Model Type: ATTINY Series Microcontroller: ATtiny85 Length (mm): 21 Width (mm): 18 Height (mm): 4 Weight (g): 4 Shipping Weight 0.005 kg Shipping Dimensions 4 × 4 × 1 cm

ATTINY85 Digispark kickstarter mini USB Development Board is a high-quality electronic component designed for Arduino, prototyping, and educational electronics. The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller (about the size of a quarter), and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE. Features: Microcontroller: ATTINY85 USB interface (direct programming) Arduino-compatible 6 I/O pins (PWM, ADC supported) Small form factor for compact projects Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source – 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED RELATED VIDEO: It’s perfect for DIY makers, students, and anyone building custom electronic circuits or STEM kits.