UNI-T UTP1310 Switching DC Programmable Power Supply 0~32V 0~10A

UNI-T UTP1310 Switching DC Programmable Power Supply 0~32V 0~10A UNI-T UTP1310 high-quality economical DC power supply has 4 digits voltage and current display, settable over voltage protection (OVP) and over current protection (OCP). It is an ideal tool for school, product line, appliance maintenance center, etc. with highly stable performance. Designed for engineers, technicians, educators, and electronics enthusiasts, the UTP1310 includes programmable control functions, high-resolution digital displays, and multiple protection mechanisms for safe and reliable operation. It is widely used in research laboratories, production testing, maintenance workshops, educational institutions, and product development environments where accurate voltage and current regulation are essential. Features Programmable voltage and current control. High-efficiency switching power supply design. Stable and precise DC output. Constant Voltage (CV) operation mode. Constant Current (CC) operation mode. Digital display for voltage, current, and power monitoring. Low ripple and noise output. Overvoltage protection. Overcurrent protection. Overtemperature protection. Short-circuit protection. Memory storage function. Compact benchtop design. High reliability for continuous operation. Suitable for laboratory and industrial use. Specifications Parameter Value Model UTP1310 Brand UNI-T Power Supply Type Programmable Switching DC Power Supply Output Voltage Range 0 ~ 32V DC Output Current Range 0 ~ 10A Maximum Output Power 320W Output Regulation Mode CV / CC Display Type Digital Display Programming Function Yes Input Voltage 220V AC ±10% Input Frequency 50/60Hz Cooling Method Intelligent Fan Cooling Protection Functions OVP, OCP, OTP, SCP Form Factor Bench Type Voltage Load regulation: -00.1°/0+5mV Line regulation: —–,0.01°/0+5mV Setting resolution: 10mV Setting accuracy: —–c.0.1%+1 digits Recall resolution: 10mV Recall accuracy: C-0.1%+1 digits Ripple: 10mVrms Current: Load regulation: …0.2°/0-4-3mA Line regulation: C0.2%+3mA Setting resolution: 1 mA Setting accuracy: f–0.2°/0+3mA Recall resolution: 1 mA Recall accuracy: 50.2%+3 digits Ripple: 5mArms OVP: 0-32V±0.2%FS Max. voltage: 32V±0.2% OCP: 0-10.0A±0.2°/0FS Max. current: 10.0A±0.2% Operating: 0°C-40°C, —t”.-80%RH Storage: -20°C-60°C, 680°/0RH Cooling mode: Air cooling Weight: 1.9Kg Size (W x H x D): 80mm x 150mm x 230mm Panel Characteristics Front Panel Voltage display Current display OCP setting button: short press to turn on (backlight on)/off (backlight off) OCP function; long press to set OCP value. When the backlight is on and the actual output value is higher than the set value, OCP function will be triggered and “-ER OCP-” will appear on the screen, you can press “ON/OFF” button to clear it. OVP setting button: short press to turn on (backlight on)/off (backlight off) OVP function; long press to set OVP value. When the actual output value is higher than the set value, OVP function will be triggered and “-ER OVP-” will appear on the screen, you can press “ON/OFF” button to clear it. “M1-M3” storage/recall buttons: short press (indicator on) to recall the stored conditions of the group; long press until the indicator is on to store the conditions. Output on/off button Positive (red) output terminal CV (constant voltage) indicator: this indicator is on under constant voltage operation. Keypad lock indicator: long press the current adjustment knob to unlock/lock (indicator on) the keypads. Under the keypad lock mode, only the ON/OFF button is valid. CC (constant current) indicator: This indicator is on under constant current operation. Voltage output adjustment knob: press to enter the setting mode and the digit will flash. Turn clockwise to increase the output voltage and turn counterclockwise to decrease the output voltage. Press the knob to select different digits. Current adjustment knob: press to enter the setting mode and the digit will flash. Turn clockwise to increase the output current and turn counterclockwise to decrease the output current. Press the knob to select different digits; long press to lock/unlock keypads. Ground terminal (GND, green): This terminal is connected to the chassis and the ground wire of the power cord. Negative (black) output terminal Rear Panel Instructions and Protective Measures Turn the power switch to OFF and connect the power cord to the device. The L terminal of the power cord plug should be connected to the live wire of the power socket, and make sure the ground wire of the power cord has a good connection with the earth. UTP1310 power supply must be grounded. To ensure good ventilation, keep a gap of 10cm between the upside/downside/left side/right side and other objects. Do not expose this device to dusty environment or the environment of corrosive gases and other harmful substances. Turn the device on for 15 minutes before performing measurements Before powering on, confirm the power supply voltage input switch is in compliance with the mains, otherwise it will cause serious malfunction. Applications Electronic circuit testing. Product development and prototyping. Repair and maintenance workshops. Research laboratories. Educational laboratories. Embedded system development. Arduino and microcontroller projects. Battery charging experiments. Automotive electronics testing. Communication equipment testing. Industrial control system testing. Quality control and production environments. Package Contents 1 x UTP1310 Power Supply Unit 1 x Power Cord 1 x User Manual 1 x Software CD (for PC interface) Documents Datasheet User Manual

UNI-T Brand