ESP32-C3 Super Mini Board

Part number ESP32-C3

1 offer in stock at 1 shopEGP 275

EGP 275 at Most Electronic

Offers

lowest price first

Each offer shows the shop's own title.

ESP32-C3 Super Mini Development Module ملحومة
Most Electronic
checked 17 days ago
EGP 275
View

Show 3 out of stock offers

ESP32-C3 Super Mini Board
Ampere ElectronicsOut of stock
checked 13 days ago
EGP 225
View
ESP32-C3 Super Mini Board
RAM ElectronicsOut of stock
checked 16 days ago
EGP 240
View
ESP32-C3 Super Mini Development Module
Makers ElectronicsOut of stock
checked 17 days ago
EGP 350
View

Details

FromMakers ElectronicsMost ElectronicAmpere Electronics

From Makers Electronics's description

ESP32-C3 Super Mini Development Module The ESP32-C3 Super Mini Development Module is an ultra-compact, high-performance development board built around the Espressif ESP32-C3 dual-mode Wi-Fi and Bluetooth 5 (LE) SoC. It features a 32-bit single-core RISC-V processor running at up to 160MHz, with onboard 4MB flash, 400KB SRAM, and 384KB ROM. Designed for IoT, wearable, and low-power embedded applications, it delivers advanced wireless capabilities and rich peripheral support in a tiny, space-saving form factor. Features Single-core 32-bit RISC-V CPU up to 160 MHz with floating-point support. Integrated 2.4 GHz Wi-Fi (802.11b/g/n) and Bluetooth 5 (LE). 400KB of SRAM, 384KB ROM, and 4MB of onboard Flash memory. Native USB-C connector for power and programming via the onboard USB-serial interface. Very low deep-sleep current suitable for battery-powered designs. Onboard BOOT and RESET buttons for easy firmware upload and recovery. Built-in status LED connected to GPIO8 (active-low). Multiple peripheral interfaces: UART, SPI, I²C, PWM, and ADC channels. Compact form factor that simplifies integration into small mechanical assemblies. PINOUT Notes: GPIO 2: a strapping to enter bootloader mode – avoid for general use. GPIO 8: connected to the onboard blue LED (inverted logic/active LOW). it’s also a strapping pin. GPIO 9: connected to the BOOT button – avoid for general use. You need to take into account the fluctuation of the state of these GPIOs when the ESP32 resets or enters into bootloader mode. So if possible, avoid using them for general use. Specifications Specification Details Chipset ESP32-C3 Processor Single-core RISC-V CPU Wireless Connectivity Wi-Fi 802.11b/g/n, Bluetooth 5 (LE) GPIO Pins Multiple GPIOs with support for ADC, SPI, I2C, and touch functions Operating Voltage 3.3V DC Programming Interface Supports programming via USB Type-C interface Security Features Secure boot, flash encryption Dimensions (L x W x H) Approximately 22.5mm x 18mm Development Support Compatible with ESP-IDF, Arduino IDE, and other development environments Applications Compact IoT sensor nodes and wireless data loggers. Battery-powered wearable devices and portable controllers. Small robotics controllers and actuator interfaces. Rapid prototyping for Wi-Fi/BLE connectivity in constrained spaces. Educational projects and embedded systems development. Package Contents 1x ESP32-C3 Super Mini Development Module. Documents Board Datasheet ESP32 C3 SuperMini Chip Datasheet ESP32 C3

ESP32-C3 Super Mini Board

Offers

Details

From Makers Electronics's description

From Most Electronic's description

From Ampere Electronics's description

Similar products