makhzan
MPPT Solar Controller 5A DC-DC Step Down CC/CV

MPPT Solar Controller 5A DC-DC Step Down CC/CV

What the shops say

From Makers Electronics's listing

Description

MPPT Solar Panel Controller 5A DC-DC Step-down CC/CV Charging Module Display LED Description: Module Properties: Non-isolated buck module (BUCK) Input voltage: 6~36 V Output voltage:1.25~32 V continuously adjustable (the default output 5V) MPPT voltage setting range: 6~36 V Output current range: 0.05~5A (The default output current is 3A) Turn lights output range: 0.01~5A (default turn lamp current 0.3A) (the current range will be a little difference because the parts parameter error) Operating temperature: -40 ~ +85 degree Operating frequency: 180 KHz Conversion efficiency: up to 95% (efficiency, input & output voltage, current and pressure-related) Short circuit protection: Yes Over temperature protection: Yes (automatically shut off the output after overtemperature) Input reverse polarity protection: None, (if necessary, please add the string into the diode) Output anti-anti-irrigation protection: None, the output must be connected to the battery plus blocking diode, otherwise it will burn the module. Installation: 4 Pcs 3mm screws Connection: IN is the input, OUT is output Multifunction double display: input voltage, output voltage, output current, output power Charging indicator: charging red, bright green when fully charged. Turn lamp is the output current detection. Module dimensions:60 x 31 x 22 mm(without meter) Applications: 1. It can support high-power LED. 2. It can power supply for electronic devices. 3. For a variety of battery charge, can observe the state of charge. 4. As a car power supply , it can for your cell phone or digital products supply. 5. DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load. 6. Charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery. Note: The module’s current detection is low-end detection. Please do not short the input negative and output negative directly with wire.

Read more

Specifications

Connection
IN is the input, OUT is output
Installation
4 Pcs 3mm screws
Input voltage
6~36 V
Output voltage
1.25~32 V continuously adjustable (the default output 5V)
Module Properties
Non-isolated buck module (BUCK)
Module dimensions
60 x 31 x 22 mm(without meter)
Operating frequency
180 KHz
Output current range
0.05~5A (The default output current is 3A)
Operating temperature
-40 ~ +85 degree
Short circuit protection
Yes
Turn lights output range
0.01~5A (default turn lamp current 0.3A)
MPPT voltage setting range
6~36 V
Multifunction double display
input voltage, output voltage, output current, output power
Input reverse polarity protection
None, (if necessary, please add the string into the diode)

Similar products

EGP 285checked today
View at Makers Electronics