Raspberry Pi Infrared Night Vision Camera (5MP - 130°FOV)

This is one of the most popular camera modules for Raspberry Pi, it is 5 Mega Pixel and 130° wide angle fisheye lens (without lens the FOV is 72° only). The camera is based on high quality OmniVision OV5647 CMOS image sensor, and compatible with all Raspberry-pi versions. This module is with built-in IR CUT lens and 2 LED lights, it works both during day time and at night ( or in dark condition, poor light conditions, etc), LED lights will trun on automatically in dark conditions. Features • Omnivision OV5647 sensor • 5MPixel sensor • Still picture resolution : 2592 x 1944 • Max video resolution : 1080p • Max frame rate: 30fps • Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board • Two IR 850 1W LED light for Night Vision • Light detector sensor for triggering IR LED • Fixed focal Lens • 16cm ribbon cable • Fisheye Lens for wide field of view • Field of View : 130 degree (where for normal lens it is 72) How to Use the infrared led module Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically. When ambient light is lower than threshold value, the infrared LED is on and vice versa. Omnivision OV5647 camera sensor datasheet Camera module setup for Raspberry Pi Codes and software demo for Raspberry pi infared camera