FTDI FT232RL USB to TTL Converter Module

USB mini to TTL FTDI Board Module FT232RL Switchable 3.3V/5V The USB mini to TTL FTDI Board Module FT232RL Switchable 3.3V/5V is a UART (universal asynchronous receiver-transmitter) board used for TTL serial communication. It is a breakout board for the FTDI FT232R chip with a USB interface, can use 3.3 or 5 V DC and has Tx/Rx and other breakout points. Features: • This FTDI board is based on FTDI original chip FT232RL. • FT232R chips are one of the newer chips manufactured by FTDI (Future Technology Devices International). • Apart from being a USB to serial UART, it has an integrated EEPROM and optional clock generator output. • The chip also incorporates FTDI Chip-ID functionality (giving each chip a unique identifier for security) and USB termination resistors. • Cloned boards (with a cloned chip) will likely exclude the unique ID functionality and does not include an EEPROM, meaning that signals cannot be inverted. • Pins: 6 pin headers and 18 through-hole connectors. DTR, RX, TX, VCC, CTS, GND and PWR, TEN, SLEEP, CTS, 3.3V, 5V, RXL, TXL, GND x 2, TXD, DTR, RTS, VCC, RXD, R1, RSD, DCD (all marked) • The internal clock (6MHz, 12MHz, 24MHz and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. • The module has a mini-B USB port which is used to connect to an USB port of an interfaced device (e.g. a PC). • On the other side, the FTDI USB to TTL serial converter module has breakout pins (Tx, Rx, Vc and GND) that is connected to a microcontroller’s corresponding pins. • Communication takes place using TTL (transistor-transistor logic). • It has a 3.3/5V DC jumper and will supply 500mA through its Vc pin. Pinout: Pin: Function GND: Ground VCC: Power output (3.3V or 5V, switchable) TXD: Transmit Data (UART TX) RXD: Receive Data (UART RX) DTR: Data Terminal Ready (Used for auto-reset in Arduino Pro Mini) CTS: Clear to Send Specifications: • Type: FTDI Board Module • Chipset: FT232RL • USB Interface: mini-B USB port • Voltage Levels: 3.3V or 5V (switchable) • Power Output: 3.3V (50mA max) or 5V (500mA max) • Baud Rate: 300bps to 3Mbps • Communication Protocol: UART (TX, RX), with CTS, RTS, DTR, DSR, RI support • EEPROM: Internal, configurable via FTDI software • Driver Support: Windows, macOS, Linux (VCP & D2XX drivers) • Connector Type: Standard 6-pin header (TX, RX, VCC, GND, CTS, DTR) • Material: PCB + Electronic Component • Board Module Color: Red • Pitch:2.54mm • Module Size(L X W): 36mm X 19mm • Operating Temperature: -40°C to +85°C Applications: • Microcontroller Programming & Debugging. • Serial Communication with Embedded Systems. • DIY Electronics & Robotics Projects. • Bootloading & Firmware Updates. • RS232/TTL Serial Communication Bridge. • CNC Machines & 3D Printers. • IoT & Home Automation. • Reverse Engineering & Hacking. Package Contents: 1 X USB Mini to TTL FTDI Board Module FT232RL Switchable 3.3V/5V

USB Type-C to TTL FTDI Board Module FT232RL Switchable 3.3V/5V The USB Type-C to TTL FTDI Board Module FT232RL Switchable 3.3V/5V is a UART (universal asynchronous receiver-transmitter) board used for TTL serial communication. It is a breakout board for the FTDI FT232R chip with a USB interface, can use 3.3 or 5 V DC and has Tx/Rx and other breakout points. Features: This FTDI board is based on FTDI original chip FT232RL. FT232R chips are one of the newer chips manufactured by FTDI (Future Technology Devices International). Apart from being a USB to serial UART, it has an integrated EEPROM and optional clock generator output. The chip also incorporates FTDI Chip-ID functionality (giving each chip a unique identifier for security) and USB termination resistors. Cloned boards (with a cloned chip) will likely exclude the unique ID functionality and does not include an EEPROM, meaning that signals cannot be inverted. Pins: 6 pin headers and 18 through-hole connectors. DTR, RX, TX, VCC, CTS, GND and PWR, TEN, SLEEP, CTS, 3.3V, 5V, RXL, TXL, GND x 2, TXD, DTR, RTS, VCC, RXD, R1, RSD, DCD (all marked) The internal clock (6MHz, 12MHz, 24MHz and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. The module has a Type-C USB port which is used to connect to a USB port of an interfaced device (e.g. a PC). On the other side, the FTDI USB to TTL serial converter module has breakout pins (Tx, Rx, Vc and GND) that is connected to a microcontroller’s corresponding pins. Communication takes place using TTL (transistor-transistor logic). It has a 3.3/5V DC jumper and will supply 500mA through its Vc pin. Pinout: Pin Function GND Ground VCC Power output (3.3V or 5V, switchable) TXD Transmit Data (UART TX) RXD Receive Data (UART RX) DTR Data Terminal Ready (Used for auto-reset in Arduino Pro Mini) CTS Clear to Send Specifications: Type: FTDI Board Module Chipset : FT232RL USB Interface : Type-C USB port Voltage Levels : 3.3V or 5V (switchable) Power Output : 3.3V (50mA max) or 5V (500mA max) Baud Rate : 300bps to 3Mbps Communication Protocol : UART (TX, RX), with CTS, RTS, DTR, DSR, RI support EEPROM : Internal, configurable via FTDI software Driver Support : Windows, macOS, Linux (VCP & D2XX drivers) Connector Type : Standard 6-pin header (TX, RX, VCC, GND, CTS, DTR) Material: PCB + Electronic Component Board Module Color: Red Pitch: 2.54mm Module Size(L X W): 36mm X 19mm Operating Temperature : -40°C to +85°C

FTDI FT232RL USB to TTL Converter Module