Transistor 2N3904

Part number 2N3904

2 offers in stock at 2 shopsEGP 0.75 – 1

EGP 0.75 at RAM Electronics

Offers

lowest price first

Each offer shows the shop's own title.

Transistor 2N3904
RAM Electronics
checked 12 days ago
EGP 0.75
View
2N3904 NPN Transistor
Micro Ohm
Price may be out of date (74 days)
EGP 1
View

Details

FromMicro OhmRAM Electronics

From Micro Ohm's description

DESCRIPTION The 2N3904 are a good general purpose NPN transistor for low power amplification and switching. PACKAGE INCLUDES: Qty 5 ? 2N3904 NPN General Purpose Transistors KEY FEATURES OF 2N3904 NPN GENERAL PURPOSE TRANSISTOR: NPN Bipolar Silicon construction Standard EBC pin-out in TO-92 package Up to 40V collector-emitter and 60V collector-base Up to 200mA current 100MHz switching speed The 2N3904 are a good inexpensive general purpose NPN transistor for low power amplification and switching and should be part of every parts bin. These can be very handy when you need to boost the output of a uC pin to drive something that it can not drive directly.? NPN transistors are generally used in low-side switching applications where they are connected between the load and ground. Here is a simple example circuit.? We have an LED indicator that we want to drive.? The indicator consists of 3 LEDs which each draw 20mA of current. A uC pin can easily drive an LED at 20mA, but this circuit will require 60mA which is outside the range of the typical uC drive capability.? You could use 3 pins on the uC to drive the 3 LEDs, but that is a waste of pins unless you have pins to spare.? This simple circuit allows you to drive all three LEDs off the same uC pin. The 4.7K resistor on the base is there to limit the current out of the uC pin to safe levels and the value is not overly critical.? A 1K or 10K will also work. The 50 ohm resistor sets the overall current for the 3 LEDs.? This value may vary a bit depending on what LEDs are being used.? The example assumes an LED voltage drop of 2V, so R = (5V ? Vled) / 60mA = 50 ohms.? Power through the that resistor is P = 60mA * 3V = 180mW so a 1/4W resistor will work, though a 1/2W would be a better choice for long-term use.? Using two 100 ohm 1/4W resistors in parallel would be another approach. If you need a little beefier NPN transistor, look at our PN2222 which can support up to 600mA and if you need more than that, check out our TIP120 Darlington transistor which can handle up to 5A. Notes:? These transistors may come with straight or preformed leads. TECHNICAL SPECIFICATIONS Maximum Ratings V CEO Collector-Emitter Voltage 40V V CBO Collector-Base Voltage 60V I C Collector Current 200mA Package TO-92 Package Type Plastic, 3-lead, through hole Mfr Fairchild / ON Semi Datasheet 2N3904

Similar products

EGP 0.75checked 12 days ago

View at RAM Electronics

Transistor 2N3904

Offers

Details

From Micro Ohm's description

From RAM Electronics's description

Similar products