NRF24L01 Wireless Module With Antenna

NRF24L01+ Wireless Module with Antenna This wireless transceiver module is based on the Nordic Semiconductor nRF24L01+ single-chip 2.4GHz transceiver. It is designed for ultra-low-power (ULP) wireless applications operating in the worldwide 2.4GHz ISM frequency band. As a module featuring a Power Amplifier (PA), Low-Noise Amplifier (LNA), and SMA antenna, it is engineered for long-range communication. Features Operating Band: Worldwide 2.4GHz ISM band operation. Data Rates: 250kbps, 1Mbps, and 2Mbps. Ultra-Low Power: Designed for ULP operation with 900nA power-down and 26µA standby-I modes. Enhanced ShockBurst: On-chip baseband protocol engine provides automatic packet handling, automatic packet transaction handling, and auto-acknowledgment. MultiCeiver: Features 6 parallel data pipes for 1:6 star network configurations. Low-Cost BOM: Requires only a low-cost ±60ppm 16MHz crystal. Dimensions : 48×15.5x14mm Antenna length : 108mm Specifications Specification Details Frequency Band 2.400 – 2.4835GHz RF Channels 126 RF channels Modulation GFSK Air Data Rates 250kbps, 1Mbps, 2Mbps Supply Voltage 1.9 to 3.6V Power Consumption (Core Chip) TX (at 0dBm): 11.3mA RX (at 2Mbps): 13.5mA Standby-I Mode: 26µA Power Down Mode: 900nA Receiver Sensitivity (Core Chip) -94dBm at 250kbps -85dBm at 1Mbps -82dBm at 2Mbps Payload Length 1 to 32 bytes, dynamic FIFO 3 separate 32-byte TX and RX FIFOs Pinout Applications Wireless Data Transmission Remote Control Systems Wireless Networking Package Content 1x NRF24L01 Wireless Module 1x SMA Antenna DataSheet NRF24L01+

The NRF24L01 Wireless Module with Antenna is a high-performance 2.4GHz transceiver module designed for wireless communication between microcontrollers . It’s ideal for Arduino, Raspberry Pi, ESP32 , and other development platforms that require reliable long-range data transmission . This module operates in the 2.4GHz ISM band and supports multiple data rates (250kbps, 1Mbps, 2Mbps) with a range of up to 1000 meters when used with the external antenna. In addition, it features a built-in PA (Power Amplifier) and LNA (Low Noise Amplifier) for enhanced signal strength and stability. Because it communicates via SPI interface , it’s easy to integrate with most microcontrollers. Also, it consumes very low power , making it perfect for IoT projects, wireless sensor networks, remote control systems, and home automation . Key Features: Model: NRF24L01+ with External Antenna Frequency: 2.4GHz ISM band Communication: SPI interface Range: Up to 1000m (with antenna) Data Rate: 250kbps / 1Mbps / 2Mbps Operating Voltage: 1.9V–3.6V (typically 3.3V) Built-in PA (Power Amplifier) and LNA (Low Noise Amplifier) Compatible with Arduino, Raspberry Pi, ESP32, and STM32 Ideal for IoT, robotics, wireless control, and data transmission Perfect for students, hobbyists, and engineers, the NRF24L01 Wireless Module with Antenna is the ideal choice for stable, long-range, and low-power wireless communication.