Mini Electric Door Lock (12V DC Solenoid)

This is a simple to use 12V Electronic Cabinet/Door Lock. You can use it to lock and unlock Cabinets/Doors using a 12V power supply. These Locks are basically electromagnets. The lock normal position (when no power supply) is locked as the lock tongue is outside and fully extended. When 12V power is applied, the lock electromagnetic coil is activated, the lock tongue is retracted (pushed inside the lock) and the lock is opened. You will need a fairly good power supply to drive a lock, as a lot of current will rush into the lock to charge up the electro-magnet. You can also use our relay boards to control the lock from an Arduino. You may also use one of our fingerprints ( R307 - R305 - K202 ) as an access control to electronic lock as shown in video below. Specifications Rated Voltage: DC 12V Current: 0.43 A Unlock time: 1 second Dimension: 54mm x 28mm x 24mm Tongue Length: 7mm Tongue Height: 10mm Cable Length: 120mm Lock Dimension : 10mm x 10 mm Instructions Connect the Red wire to positive and the green wire to negative. Connect the Red wire to positive and the green wire to negative. 12V DC Electronic Door Lock Arduino tutorial with solenoid and fingerprint.