



Fast-Acting Rust Remover Solution 100mL
From the shop's description
Fast-Acting Rust Remover Solution 100ml Engineered for rapid rust removal from ferrous metals; it penetrates deep corrosion within minutes to restore substrates without compromising structural integrity. Features: Fast acting remover destroys rust, leaving bare metal ready to prime. Chemically reacts with rust, making it easy to remove. Ideal for removing rust from tools, smaller metal objects or for tight recessed areas, box sections, tubular components, automotive, bodywork, chassis, wheel arches, tools, bikes, boats, caravans, gates, garden furniture, etc. 100ml is sufficient to covers approximately up to 400 sq. cm. Usage (Applications): It works well for removing rust from iron, steel or other ferrous surfaces such as pipes, railings, auto body, tanks, tools, grills and equipment. Usage Recommendations (very important): Follow safety precautions & notes. De-grease and remove contaminants via mechanical wire brushing, sanding, or abrasive blasting (Ensure the metal is dry, clean, and free of dust or dirt, It can be cleaned using alcohol, thinner, or any other solvent). Agitate well before use, apply uniformly via immersion, spray, or brush techniques (the metal temperature should not be below 25°C). Wait for (30~60) minutes until rust removal at from 30~35 celsius (ensure surface wetting; re-coat as required to avoid drying out the metal). Rinse well with water and dry immediately to prevent flash rusting. Apply primer or topcoat (immediately after process). Notes: For best results, follow the usage recommendations. Don’t dilute with water or any other liquid. If the solution is warm, the rust layer will be removed fast, to warm the solution, place the bottle in warm water at a temperature of 35 to 45 Celsius for a short period, by following the safety precautions and don’t put the solution on direct heat. Use only glass or plastic containers (Do not use metal containers!). Safety Precautions: Wearing plastic gloves is recommended when using. Keep the bottle tightly closed after using & keep away from children. Use enough water when eyes or wounds are touched. Appearance: The solution is a transparent liquid, packaged in a plastic bottle – (Net capacity) 100mL. 📌 الضمان على جميع الأصناف هو ضمان 3 أشهر من تاريخ الشراء Thanks for Your Trust
Read moreShow less
Similar products
RS-20 Modified Siliconized Penetrating Oil (400ml)EGP 901 shopchecked 16 days ago
TESON Electronic Contact Cleaner Dry Spray 200mL TA-1820EGP 901 shopPrice may be out of date (74 days)
Akai universal Foam Cleaning AgentEGP 901 shopchecked 15 days ago
AMRO MDF Kit Glue Instant Adhesive 50g with Adhesive Activator 200mlEGP 951 shopchecked 17 days ago
ABRO EC-533 Electronic Contact CleanerEGP 951 shopchecked 12 days ago
MALDINI MD-40 Rust Remover Spray 200mlEGP 851 shopchecked 11 days ago
Mitreapel Instant Adhesive AC400 with Adhesive Activator 400mlEGP 951 shopchecked 12 days ago- ABRO Sticker RemoverEGP 851 shopchecked 11 days ago