Name: LM35DZ Temperature Sensor (Precision Centigrade)
Brand: Future Electronics Egypt

From Most Electronic's description

Original LM35DZ Temperature Sensor The LM35DZ Temperature Sensor measures temperature and provides a linear analog voltage output. Its output increases by 10mV for every 1°C rise in temperature. Unlike Kelvin-calibrated sensors, the LM35DZ provides a direct Celsius reading. Therefore, your circuit does not need to subtract a large voltage offset. Key Features Measures temperature directly in Celsius Provides a linear 10mV/°C analog output Operates from a 4V to 30V supply Offers good accuracy without external calibration Draws less than 60µA from the power supply Produces very low self-heating Provides a low-impedance output Comes in a compact three-pin TO-92 package Connects easily to Arduino and microcontrollers Technical Specifications Part Number: LM35DZ Sensor Type: Analog temperature sensor Package: TO-92 Number of Pins: Three Temperature Scale: Celsius Operating Range: 0°C to 100°C Output Scale Factor: 10mV/°C Typical Accuracy at 25°C: ±0.6°C Maximum Accuracy Error at 25°C: ±1.5°C Supply Voltage: 4V–30V DC Current Drain: Less than 60µA Typical Self-Heating: Approximately 0.08°C in still air Typical Non-Linearity: Approximately ±0.2°C Pin Configuration With the flat side facing you and the pins pointing downward: +VS: Positive supply voltage VOUT: Analog temperature output GND: Ground However, always confirm the package orientation before connecting power. Output Calculation The sensor provides 10mV for every degree Celsius. Therefore, use this formula: Temperature (°C) = Output Voltage (mV) ÷ 10 For example: 100mV represents 10°C 250mV represents 25°C 500mV represents 50°C 1000mV represents 100°C Arduino Connection Connect the +VS pin to a suitable power source. Connect the GND pin to circuit ground. Connect VOUT to an Arduino analog input. Read the analog voltage. Convert the voltage into Celsius using the 10mV/°C scale. Applications The LM35DZ works well in: Arduino temperature projects Environmental monitoring systems Fan control circuits Power supply temperature monitoring Battery management projects HVAC systems Household appliances Laboratory equipment Educational electronics projects Package Contents 1 × Original LM35DZ temperature sensor Important Notes This product provides an analog output, not a digital signal. Use an ADC input to read the output with a microcontroller. Check the pin arrangement before applying power. Reverse polarity may permanently damage the sensor. Keep the sensor away from moisture and electrical interference. The package includes the sensor only.

From Micro Ohm's description

Product Title LM35DZ Analog Temperature Sensor – Original Introduction The LM35DZ is a precision integrated-circuit temperature sensor from Texas Instruments. It provides an analog voltage output directly proportional to the Celsius temperature, making it an easy and reliable choice for temperature measurement in embedded systems, Arduino projects, and industrial applications. Unlike thermistors, the LM35 does not require complex calibration and delivers a linear output of 10 mV per °C . Key Features Directly calibrated in Celsius (°C). Linear output: 10 mV/°C. Accuracy: ±0.5 °C typical at room temperature. Operating voltage range: 4 V to 30 V. Low self-heating (<0.1 °C in still air). Current consumption: less than 60 μA. Compact TO-92 package, easy to integrate on breadboards or PCBs. Technical Specifications Temperature Range: 0 °C to +100 °C (LM35DZ version). Supply Voltage: 4 V to 30 V. Output Voltage: 0 mV at 0 °C, 1 V at 100 °C. Accuracy: ±0.5 °C typical (±1 °C max at 25 °C). Package: TO-92 (3-pin). Pinout: Pin 1: VCC (4–30 V) Pin 2: VOUT (analog output) Pin 3: GND How to Use Connect VCC to +5 V (or any supply between 4–30 V). Connect GND to ground. Read the analog voltage from VOUT using an ADC (e.g., Arduino analog pin). Convert output voltage to Celsius: Temperature (°C) = VOUT (in mV) ÷ 10 Applications HVAC systems and thermostats Industrial process monitoring Consumer electronics (air conditioners, refrigerators) Arduino and microcontroller projects Weather stations and environmental monitoring حساس حرارة LM35DZ تناظري – أصلي عنوان المنتج حساس حرارة LM35DZ تناظري – أصلي المقدمة يُعد LM35DZ حساس حرارة دقيق من إنتاج Texas Instruments. يعطي خرجًا تناظريًا متناسبًا مباشرة مع درجة الحرارة بالدرجة المئوية، مما يجعله خيارًا موثوقًا وسهل الاستخدام في مشاريع الأنظمة المدمجة، الأردوينو، والتطبيقات الصناعية. بخلاف الثرمستورات، لا يحتاج LM35 إلى معايرة معقدة ويُعطي خرجًا خطيًا بمعدل 10 ملي فولت لكل درجة مئوية . الميزات الرئيسية معاير مباشرة بالدرجة المئوية (°C). خرج خطي: 10 ملي فولت/°C. دقة: ±0.5 °م عادة عند درجة حرارة الغرفة. مدى جهد التشغيل: 4 فولت إلى 30 فولت. تسخين ذاتي منخفض (<0.1 °م في الهواء الساكن). استهلاك تيار أقل من 60 ميكرو أمبير. حزمة TO-92 صغيرة الحجم وسهلة الدمج على البوردات. المواصفات الفنية مدى الحرارة: 0 °م إلى +100 °م (نسخة LM35DZ). جهد التغذية: 4 – 30 فولت. خرج الجهد: 0 ملي فولت عند 0 °م، و1 فولت عند 100 °م. الدقة: ±0.5 °م عادة (±1 °م كحد أقصى عند 25 °م). التغليف: TO-92 (3 أطراف). توزيع الأرجل: الطرف 1: VCC (4–30 فولت) الطرف 2: VOUT (خرج تناظري) الطرف 3: GND طريقة الاستخدام صِل VCC إلى +5 فولت (أو أي مصدر بين 4–30 فولت). صِل GND إلى الأرضي. اقرأ الخرج التناظري من VOUT باستخدام مدخل ADC (مثل مدخل أردوينو analog). معادلة التحويل: درجة الحرارة (°م) = VOUT (بالملي فولت) ÷ 10 التطبيقات أنظمة التكييف والتحكم في الحرارة المراقبة الصناعية الإلكترونيات الاستهلاكية (مكيفات، ثلاجات) مشاريع أردوينو والأنظمة المدمجة محطات الطقس وأنظمة الرصد البيئي

From Makers Electronics's description

Product Description The LM35 series are precision IC temperature sensors, with an output voltage linearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full ?55°C to +150°C temperature range. Specification Supply voltage: 4 V to 30 V The scale is calibrated to degrees of Celsius Linear scale: 10,0 mV/°C Accuracy 0.5 °C Measuring range: from 0°Cto 100°C Current of drain is below 60 mA Details in the documentation . The product is compatible with Arduino Library to facilitate maintenance of the thermometer using Arduino is available at this address . Useful links Documentation of LM35DZ

From Future Electronics Egypt's description

Product Description The LM35 series are precision IC temperature sensors, with an output voltage linearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full ?55°C to +150°C temperature range. Features Calibrated directly in Celsius Linear + 10 mV/°C scale factor 0.5°C ensured accuracy (at +25°C)