NFC Card NTAG215 13.56MHz PVC Smart Card

NFC Card 13.56MHz – NTAG215 Chip (White PVC) This is a blank 13.56MHz RFID/NFC Card with an NTAG215 chip – often used for train/bus passes, information sharing, contactless payment, but also found in other systems where a proximity card is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader, but make sure it can handle ISO/IEC 14443 Type A cards (the standard NTAG uses) as there are a few other encoding standards (like FeLica). These chips can be written to and store up to 504 bytes of data in writable EEPROM divided into 4 byte banks, and can handle over 10,000 re-writes. You can use our PN532 NFC/RFID breakout board or NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 7-byte serial number ID burned into the chip that you can use to identify one tag from another – the ID number cannot be changed. These use an NTAG chipset, a ‘Type 2’ tag that is usable with any smartphone. Unlike “Classic 1K” cards (a.k.a MiFare S50s), these tags are more secure and work with almost any phone with RFID support since they avoid the patent issues with Mifare, which requires an NXP chipset or license fee. Features: Durable and waterproof PVC material Small and portable design Compatible with various NFC-enabled devices 32-bit password authentication Easy to use and program Contactless transmission of data and supply energy Operating frequency of 13.56 MHz Data transfer of 106 kbit/s Data integrity of 16-bit CRC, parity, bit coding, bit counting Operating distance up to 100 mm (depending on various parameters as e.g. field strength and antenna geometry) 7-byte serial number (cascade level 2 according to ISO/IEC 14443-3) UID ASCII mirror for automatic serialization of NDEF messages Automatic NFC counter triggered at read command NFC counter ASCII mirror for automatic adding the NFC counter value to the NDEF message ECC based originality signature Fast read command True anticollision 50 pF input capacitance Data retention time of 10 years Write endurance 100,000 cycles Technical Specifications: Specification Value Operating Frequency 13.56 MHz Chip Type NXP NTAG215 User Memory 504 Bytes Total Memory Capacity 540 Bytes UID Size 7 Bytes Reading Range Up to 10 cm (Depending on Antenna Geometry) Data Transfer Rate Up to 106 kbps NFC Protocol NFC Forum Type 2 Communication Protocol ISO/IEC 14443-3A Card Dimensions 85.6 × 54 × 0.8 mm Material PVC Weight 5.3 g Applications: Access control. Identification cards. NFC business cards. Smart contact cards. URL and website sharing. Product information tags. Attendance systems. Smart advertising. Inventory identification. NFC development projects. IoT and automation projects. Package Included: 1x NFC Card 13.56MHz – NTAG215 Chip (White PVC). Useful Links: Android NFC developer info. Some handy Android NFC Apps that you can use. NTAG213 Datasheet.

NFC Card NTAG215 13.56MHz (1 pc, White PVC) كارت NFC شريحة NTAG215 تردد 13.56MHz (قطعة واحدة، PVC أبيض) Overview | نظرة عامة English: A standard NFC 13.56MHz smart card based on NXP NTAG215 . It’s compliant with ISO/IEC 14443‑A and NFC Forum Type 2 , allowing fast read/write from modern smartphones and NFC readers. The card ships blank (no printing), made from white PVC in ISO/ID‑1 size (85.6 × 54 × ~0.84 mm) , ready for stickers or direct printing with card printers. العربية: بطاقة NFC بتردد 13.56MHz تعتمد على NXP NTAG215 ، متوافقة مع ISO/IEC 14443‑A و NFC Forum Type 2 ، ما يتيح القراءة والكتابة السريعة من الهواتف الحديثة وقارئات NFC. تصل البطاقة فارغة (دون طباعة)، خامة PVC أبيض بمقاس ID‑1 (85.6 × 54 × ~0.84 مم) مناسبة للملصقات أو الطباعة المباشرة بطابعات البطاقات. Key Features | المزايا الرئيسية English: 📶 13.56MHz ISO14443‑A (Type A) for broad compatibility with Android/iOS NFC. 🧠 NTAG215 memory: 540 bytes total with ~492 bytes usable for NDEF records (URLs, text, vCards, app links). ✍️ Writable / lockable — supports making the card read‑only after programming. ⚡ Fast anti‑collision & quick tap response; works well through thin cases/stickers. 🧩 ISO/ID‑1 size white PVC for badges and custom printing. العربية: 📶 13.56MHz معيار ISO14443‑A لتوافق واسع مع هواتف أندرويد وآيفون. 🧠 ذاكرة NTAG215: إجمالي 540 بايت مع ~492 بايت فعّالة لـNDEF (روابط، نصوص، بطاقات اتصال، روابط تطبيقات). ✍️ قابلة للكتابة والقفل — يمكن تحويلها إلى للقراءة فقط بعد البرمجة. ⚡ استجابة سريعة مع مضاد‑تصادم وتعمل جيدًا عبر الملصقات/الأغطية الرقيقة. 🧩 مقاس بطاقة قياسي PVC أبيض للطباعة والبادجات. Compatibility | التوافق English: NTAG215 (Type 2) works with NFC‑enabled phones (Android and iPhone with NFC), USB readers (ACR122U clones/newer Type‑2 readers), Arduino/ESP32 modules with PN532, and kiosk/contactless terminals that read NDEF. Not compatible with 125kHz LF systems (EM/TK). العربية: تعمل NTAG215 (Type 2) مع الهواتف المزوّدة بـNFC (أندرويد وآيفون)، وقارئات USB (مثل ACR122U وما يماثله وقراء Type‑2 الحديثة)، ووحدات أردوينو/‏ESP32 مع PN532، والكيُوسك/الأجهزة التي تقرأ NDEF. غير متوافقة مع أنظمة LF 125kHz (EM/TK). Specifications | المواصفات الفنية English: Chip / Type: NXP NTAG215 , NFC Forum Type 2 , ISO/IEC 14443‑A Frequency: 13.56MHz User Memory: ~492 bytes usable NDEF (540 bytes total, 135 pages × 4 bytes) Security: Password protection , read‑only lock (one‑way) Size: 85.6 × 54 × ~0.84 mm (ID‑1) Material/Color: PVC, white Operating Range: 0–5 cm typical (reader dependent) Operating Temp: ‑25°C to +70°C (typ.) Packaging: 1 pc (blank, no print) العربية: الشريحة/النوع: NXP NTAG215 ، NFC Forum Type 2 ، ISO/IEC 14443‑A التردد: 13.56MHz ذاكرة المستخدم: ~492 بايت فعّالة NDEF (إجمالي 540 بايت، 135 صفحة × 4 بايت) الحماية: كلمة مرور وإمكانية قفل قراءة فقط (اتجاه واحد) المقاس: 85.6 × 54 × ~0.84 مم (ID‑1) الخامة/اللون: PVC أبيض مدى التشغيل: 0–5 سم (حسب القارئ) درجة التشغيل: ‑25° إلى +70°م (تقريبي) التغليف: قطعة واحدة (فارغة بلا طباعة) How to Use | طريقة الاستخدام English: Write an NDEF record (URL, text, vCard) using an NFC app (e.g., NFC Tools) or a desktop writer. Test by tapping with your phone. If needed, set a password or lock the tag to read‑only for deployments. العربية: اكتب سجل NDEF (رابط، نص، بطاقة اتصال) عبر تطبيق NFC (مثل NFC Tools) أو قارئ مكتبي، ثم اختبر باللمس بهاتفك. عند الحاجة عيّن كلمة مرور أو اقفل البطاقة كقراءة فقط للاستخدامات النهائية. Applications | الاستخدامات English: Smart posters, URL/app launch, Wi‑Fi or contact sharing, kiosk check‑in, product pairing, maker projects with PN532/ESP32. العربية: الملصقات الذكية، فتح الروابط/التطبيقات، مشاركة الواي‑فاي أو جهات الاتصال، تسجيل الوصول بالكيوسك، إقران المنتجات، مشاريع الهواة مع PN532/‏ESP32. What’s in the Package | محتويات العبوة English: 1× NFC NTAG215 card, white PVC (blank). العربية: عدد 1 بطاقة NFC NTAG215، PVC أبيض (فارغة). : MIFARE Ultralight C, NTAG213, NTAG216, generic Type 2 cards. : ntag215 13.56mhz card, nfc type 2, ndef 492 bytes, iso14443a card, white pvc badge. : NFC smart card, NTAG215 badge, 13.56MHz tag, Type 2 card.

NFC Card NTAG215 13.56MHz PVC Smart Card The NTAG215 NFC PVC Smart Card is a contactless smart card featuring an NTAG215-compatible NFC chip operating at 13.56 MHz . The card is designed for NFC applications including digital business cards, access control, membership systems, identification, marketing, URL sharing, and electronics projects. Key Features Chip Type: NTAG215-compatible NFC chip Frequency: 13.56 MHz Protocol: ISO/IEC 14443 Type A User Memory: 504 bytes* Material: PVC Card Size: 85.6 × 54 mm (CR80) Typical Thickness: 0.76 mm Read/Write: Yes* Contactless Operation: Yes NFC Compatible: Compatible with NFC-enabled smartphones and readers Applications NFC Digital Business Cards Access Control Membership & Loyalty Cards Event Cards Smart Marketing URL and Contact Sharing Identification Systems IoT and Electronics Projects Technical Specifications Specification Details Chip NTAG215-Compatible Frequency 13.56 MHz Protocol ISO/IEC 14443 Type A Memory 504 Bytes* Material PVC Dimensions 85.6 × 54 mm Thickness Approx. 0.76 mm Read/Write Yes* Operating Distance Up to approx. 5 cm* Note: This product is an NTAG215-compatible card and is not marketed as an original NXP NTAG215 product . Important Notes Fully compatible with Android NFC devices Not compatible with some iOS NFC apps (depends on application) Can be customized (printing / UID / encoding available upon request)