L298N Dual Full H-Bridge Driver

L298N Dual Full-Bridge Driver ICs 46V 4A Multiwatt15 V The L298N is a high-performance, monolithic, dual full-bridge driver that supports TTL logic inputs. It is designed to drive inductive loads, such as motors and relays, and can be used with a variety of actuators. This IC is housed in a 15-lead Multiwatt or PowerSO-20 package, making it versatile for different applications. The device contains two independent full-bridge outputs, each capable of controlling a motor or actuator. It allows forward, reverse, and stop control by switching the states of its inputs. The L298N supports a wide operating voltage range and can provide sufficient current to power demanding devices. This dual driver is capable of managing a total DC current of up to 4A at a voltage of 46V. It incorporates several protection features, including over-temperature protection. The IC operates efficiently with a low saturation voltage, ensuring optimal performance in demanding environments. Features: Operating supply voltage up to 46 V. 4.5-7VDC logic supply voltage. Total dc current up to 4 A. Low saturation voltage. Over Temperature Protection. Logical “0” input voltage up to 1.5 V (high noise immunity). Specifications: Product Attribute Attribute Value datasheet L298N Product Category Motor/Motion/Ignition Controllers & Drivers Series L298 Model L298N Product Brushed DC Motor Drivers Type Full Bridge Package/Case Multiwatt-15V Mounting Style Through Hole Number of Outputs 4 Output Output Current 4 A Operating Supply Current 13 mA Factory Pack Quantity 500 Supply Voltage – Max 46 V Supply Voltage – Min 4.8 V Operating Temperature -25 °C to +130 °C Pin Configurations:

L298N Dual H Bridge Driver Module This L298N Dual H Bridge Driver Module is a high power motor driver module for driving DC and Stepper Motors. This module consists of an L298 motor driver IC and a 78M05 5V regulator. L298N Module can control up to 4 DC motors, or 2 DC motors with directional and speed control. Pinout: Pin Name Description IN1 & IN2 Motor A input pins. Used to control the spinning direction of Motor A IN3 & IN4 Motor B input pins. Used to control the spinning direction of Motor B ENA Enables PWM signal for Motor A ENB Enables PWM signal for Motor B OUT1 & OUT2 Output pins of Motor A OUT3 & OUT4 Output pins of Motor B 12V 12V input from DC power Source 5V Supplies power for the switching logic circuitry inside L298N IC GND Ground pin Specifications: Driver Model: L298N 2A Driver Chip: Double H Bridge L298N Motor Supply Voltage (Maximum): 46V Motor Supply Current (Maximum): 2A Logic Voltage: 5V Driver Voltage: 5-35V Driver Current:2A Logical Current:0-36mA Maximum Power (W): 25W Current Sense for each motor Heatsink for better performance Power-On LED indicator Applications: Drive DC motors. Drive stepping motors In Robotics Package Includes: 1x L298 Module Documents: Tutorial Datasheet Related Products: Motor Drivers

Dual Full H Bridge Driver