Ethernet Network Module SPI to Ethernet Hardware TCP/IP W5500

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack. The module Supports transmission rate of 10/100MBPS. Also, support sleep mode and wake on LAN, Within the integrated 32K TX/RX cache. SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module has 8 independent ports run at the same time, Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol. Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines. Applications: Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters Serial-to-Ethernet: Access Controls, LED displays, Wireless AP relays, etc. Parallel-to-Ethernet: POS / Mini Printers, Copiers USB-to-Ethernet: Storage Devices, Network Printers GPIO-to-Ethernet: Home Network Sensors Security Systems: DVRs, Network Cameras, Kiosks Factory and Building Automation Medical Monitoring Equipment Embedded Servers Features: Supports both 3.3V & 5V. Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE 10BaseT/100BaseTX Ethernet PHY embedded. Supports automatic response (full duplex/half duplex mode). Supports 8 independent sockets simultaneously. Internal 32Kbytes Memory for Tx/Rx Buffers. Power off mode: support. Network wake: support. SPI interface (SPI MODE 0, 3), convenient connection with MCU. W5500 Features: Supports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE Supports 8 independent sockets simultaneously Supports Power down mode Supports Wake on LAN over UDP Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3) Internal 32Kbytes Memory for Tx/Rx Buffers 10BaseT/100BaseTX Ethernet PHY embedded Support Auto Negotiation (Full and half duplex, 10 and 100-based) Not support IP Fragmentation 3.3V operation with 5V I/O signal tolerance LED outputs (Full/Half duplex, Link, Speed, Active) 48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch) Specifications: Chip type W5500 Input Voltage (V) 3.3 ~ 5 Supports Hardwired TCP/IP Protocols TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE Internal Memory (KByte) 32 Length (mm) 60 Width (mm) 28 Height (mm) 17

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. The SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack. The module Supports transmission rate of 10/100MBPS. Also, s upport sleep mode and wake on LAN, Within the integrated 32K TX/RX cache. SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module has 8 independent ports run at the same time, Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol. Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines. Applications: Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters Serial-to-Ethernet: Access Controls, LED displays, Wireless AP relays, etc. Parallel-to-Ethernet: POS / Mini Printers, Copiers USB-to-Ethernet: Storage Devices, Network Printers GPIO-to-Ethernet: Home Network Sensors Security Systems: DVRs, Network Cameras, Kiosks Factory and Building Automation Medical Monitoring Equipment Embedded Servers Features of SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module: 10BaseT/100BaseTX Ethernet PHY embedded. Supports automatic response (full duplex/half duplex mode). Supports 8 independent sockets simultaneously. Internal 32Kbytes Memory for Tx/Rx Buffers. Power off mode: support. Network wake: support. SPI interface (SPI MODE 0, 3), convenient connection with MCU. Package Includes: 1 x SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module. W5500 DATASHEET: DOWNLOAD Chip type W5500 Input Voltage (V) 3.3 ~ 5 Supports Hardwired TCP/IP Protocols TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE Internal Memory (KByte) 32 Length (mm): 60 Width (mm): 28 Height (mm): 17 Weight (g): 12 Shipping Weight 0.016 kg Shipping Dimensions 12 × 9 × 4 cm

Complete Ethernet board for Arduino / Microcontroller