ESUN PLA+ Filament 1.75mm 1Kg Roll for 3D Printer

PLA+ The product is modified based on PLA material, and is easy to print, in addition, it improves the toughness and layer adherence. Diameter Size: 1.75mm Net Weight: 1kg/spool Introduction: Description PLA+ is an environment-friendly material, which is easy to print and has a smooth surface. Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing; Approved by FDA, safer to use; Can be used for the conceptual model, rapid prototyping. Filament Properties Table 3D PRINTING FILAMENT PLA+ Density(g/cm 3 ) 1.23 Heat Distortion Temp(℃,0.45MPa) 53 Melt Flow Index(g/10min) 5（190℃/2.16kg） Tensile Strength(MPa) 63 Elongation at Break(%) 20 Flexural Strength(MPa) 74 Flexural Modulus(MPa) 1973 IZOD Impact Strength(kJ/㎡) 9 2/10 Durability 4/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 210 – 230℃ Recommended temperature：215℃ Bed temperature(℃) 45 – 60°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI