BT136-600E Triac 600V 4A TO-220

BT136-600E Triac 600V 4A TO-220 The BT136-600E is a bidirectional triac switch designed for AC power control. It functions like two SCRs back-to-back, allowing current to flow in both directions once a gate pulse is applied. Structurally, it has three terminals (MT1, MT2 and Gate) and comes in a TO-220 through-hole package, which provides heat dissipation for high-voltage switching. Its sensitive gate means it can be driven by low-current logic signals, so a small trigger current turns it on. Once triggered, the triac latches on and conducts AC until the current falls below its holding level. The BT136-600E is planar passivated for high-voltage ruggedness and exhibits a low holding current, making it stable under light-load conditions. In context, this device is used wherever robust AC switching or phase control is needed (e.g. motor speed or light dimming), providing a compact solution for controlling AC loads with digital or analog driving circuits. Features: • Direct triggering from low power drivers and logic ICs. • High blocking voltage capability. • Low holding current for low current loads and lowest EMI at commutation. • Planar passivated for voltage ruggedness and reliability. • Sensitive gate. • Triggering in all four quadrants. Pin Configuration: Specifications: Product Attribute: Attribute Value Product Category: Triacs Series: BT136 Model: BT136-600E Package/Case: TO-220 Mounting Type: Through Hole Number of terminals: 3 Non Repetitive On-State Current: 27 A Rated Repetitive Off-State Voltage VDRM: 600 V On-State Current(It (rms)): 4A Off-State Leakage Current @ VDRM IDRM: 100 µA On-State Voltage: 1.7 V Holding Current Ih Max: 15 mA Gate Trigger Voltage – Vgt: 1.5 V Gate Trigger Current – Igt: 25 mA Operating Temperature: -40°C ~ 125°C Applications: • General purpose motor control. • General purpose switching. Package Included: • 1x BT136-600E Triac 600V 4A TO-220 Datasheet: • BT136-600E

BT136-600E TRIAC Gate Trigger, 600V 4A, TO-220 A range of TRIACs (Triodes for Alternating Current is also known as Bidirectional Thyristors). They are used in AC switching and control applications with current ratings from under 1A to 40A rms. A TRIAC makes a convenient switch for alternating current circuit. Specifications: Attribute Value Rated Average On-State Current 4A Mounting Type Through Hole Package Type TO-220AB Maximum Gate Trigger Current 25mA Repetitive Peak Reverse Voltage 600V Surge Current Rating 27A Pin Count 3 Maximum Gate Trigger Voltage 1.5V Repetitive Peak Forward Blocking Voltage 600V Maximum Holding Current 15mA Dimensions 10.3 x 4.7 x 9.4mm Length 10.3mm Width 4.7mm Height 9.4mm Peak On-State Voltage 1.7V Maximum Operating Temperature +125 °C Minimum Operating Temperature -40 °C Repetitive Peak Off-State Current 0.5mA Package Includes: 1x TRIAC Documents : Datasheet Related Products: Thyristors | Triac