DM542 Stepper Motor Driver 4.2A, 18-50Vdc

DM542 Stepper Motor Driver 4.2A, 18-50Vdc The DM542 is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542 an ideal choice for high requirement applications. Specifications: DM542 Stepper Motor Driver. Anti-Resonance, provides optimum torque and nulls mid-range instability. Input voltage 18-50VDC. Output current programmable, from 1A to 4.2A. Pulse input frequency up to 200 KHz. Suitable for 2-phase and 4-phase motors. Automatic idle-current reduction. Over-voltage, over-current protection. TTL compatible and optically isolated input. Support PUL/DIR and CW/CCW modes. Operating Temperature : 70 C. Power and Motor Terminal Assignments Terminal No. Terminal Name Description Terminal 1 +Vdc Power supply, 20~30 VDC, Including voltage fluctuation and EMF voltage. Terminal 2 GND Power ground Terminal 3 A+ Motor Phase A+ Terminal 4 A- Motor Phase A- Terminal 5 B+ Motor Phase B+ Terminal 6 B- Motor Phase B- Pulse and Direction Inputs Terminal No. Terminal Name Description Terminal 1 PUL+ Pulse +ve input Terminal 2 PUL- Pulse -ve input Terminal 3 DIR+ Direction +ve input Terminal 4 DIR- Direction -ve input Terminal 5 ENA+ Enable +ve input Terminal 6 ENA- Enable -ve input Package Includes: 1 x DM542 Stepper Motor Driver Products Manual: DM542 User Manual Related Products: Motor Drivers

DM542 Digital Stepper Motor Driver 20-50VDC 1.0-4.2A Fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542 an ideal choice for high requirement applications. Features Anti-Resonance provides optimal torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors. Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement. 15 selectable microstep resolutions 400 – 25600 steps/rev. Soft-start with no “jump” when powered on. Support PUL/DIR and CW/CCW modes. Optically isolated inputs (5–24 V). Over-voltage, over-current protections. Specifications Parameter Value Model DM542 Driver Type DSP-controlled two-phase hybrid stepper driver Supported Models NEMA 17–23 hybrid stepper motors Input Voltage 20–50 VDC (typical 24–48 VDC) Peak Output Current 1.0–4.2 A (DIP-configurable) Microstep Resolution 400–25600 steps/rev Pulse Frequency Up to 200 kHz Control Modes PUL/DIR or CW/CCW (jumper-selectable) Idle‑Current Reduction 50% after ~1 s inactivity (SW4) Protections Over‑voltage, over‑current, phase‑short Operating Temp Range 0 °C–50 °C Storage Temp Range –20 °C–65 °C PINOUT Applications Drives NEMA 17–23 motors in CNC routers, laser engravers, and 3D printers. Ideal for pick‑and‑place machines, XY tables, and automation requiring low noise. Suited for robotics, instrumentation, and light‑industrial motion control. Package Contents 1x DM542 Digital Stepper Motor Driver 20-50VDC 1.0-4.2A. Manual DM542 Digital Driver.

Input 20~50 Vdc, Max Output Current 4.2A