W1219 Temperature Controller Dual Display – 12Vdc

Part number W1219

3 offers in stock at 3 shopsEGP 160

EGP 160 at Ampere Electronics

Offers

lowest price first

Each offer shows the shop's own title.

W1219 Temperature Controller Dual Display – 12Vdc
Ampere Electronics
checked 19 days ago
EGP 160
View
XH-W1219 Dual LED Display Thermostat Temperature Controller Module 12V
Makers Electronics
checked 21 days ago
EGP 160
View
XH W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor
Micro Ohm
Price may be out of date (74 days)
EGP 160
View

Details

FromAmpere ElectronicsMakers ElectronicsMicro Ohm

From Makers Electronics's description

XH-W1219 Dual LED Display Thermostat Temperature Controller Module 12V The XH-W1219 Dual LED Display Thermostat Temperature Controller Module 12V is an intelligent thermostat module designed to provide precise temperature measurement and automatic relay control for heating or cooling systems. Powered from a 12VDC supply, the module continuously monitors temperature using the included 10K NTC waterproof temperature sensor and switches the relay output according to the configured temperature settings. Features: Dual LED display for current and set temperatures. Supports both heating and cooling modes. Powered from 12VDC. Waterproof 10K NTC temperature sensor included. High-precision temperature measurement. Adjustable hysteresis setting. Temperature calibration function. Relay delay start function. High-temperature alarm function. Specifications: Parameter Value Model XH-W1219 Power Supply DC12V Relay Current 50mA Control Range -50°C to 110°C Control Precision 0.1°C Measuring Input NTC10K waterproof temperature sensor Sensor Cable Length 0.5m Output Type Relay output (Max. 10A at 250VAC / 20A at 14VDC) Return Difference Setting 0.1°C to 30°C Delay Starting 0 to 10 minutes Temperature Calibration -10°C to 10°C High-Temperature Alarm -49°C to 110°C Dimensions 60 x 44 x 16mm Applications: Aquariums. Refrigerators. Water heaters. Greenhouses. HVAC control. Fermentation systems. Cooling fan controllers. Battery temperature monitoring. DIY automation projects. How to restore factory settings: Under normal power, press and hold the + and – keys for about three seconds to restore factory settings. PO temperature control mode: This value must be set when the thermostat is used for the first time. If it is used for heating, it must be set to H. If it is used for cooling, it should be set to C. P1 difference setting: Press the SET button for a long time to enter the internal settings, select the P1 setting, and then press the SET button again to set the hysteresis value. (The hysteresis is the difference needed when the thermostat reaches the set temperature and stops working again.) P2 temperature calibration: This function is used for temperature calibration. If there is a deviation between the detected temperature and the actual temperature, this function can be used to correct. The corrected value = measured value + correction value. (If you do not control the compressor or do not need the delay function, skip this item directly) P4 high-temperature alarm: Set the high-temperature alarm value. When the real-time temperature exceeds this value, the screen will flash a warning alarm. Package Include: 1x XH-W1219 Dual LED Display Thermostat Temperature Controller Module 12V. 1x Waterproof NTC Temperature Sensor Document: User Manual

W1219 Temperature Controller Dual Display – 12Vdc

Offers

Details

From Ampere Electronics's description

From Makers Electronics's description

From Micro Ohm's description

Similar products